Sun Microsystems, Inc.  Sun System Handbook - ISO 4.1 October 2012 Internal/Partner Edition
   Home | Current Systems | Former STK Products | EOL Systems | Components | General Info | Search | Feedback

Asset ID: 1-71-1012410.1
Update Date:2012-07-30
Keywords:

Solution Type  Technical Instruction Sure

Solution  1012410.1 :   Sun QFS and Storage Archive Manager (SAM): Sun StorEdge[TM] L25 Tape Library/Sun StorEdge[TM] L100 Requires Entry in inquiry.conf.  


Related Items
  • Sun QFS and Storage Archive Manager (SAM)
  •  
  • Sun Storage L25 Tape Library
  •  
Related Categories
  • PLA-Support>Sun Systems>TAPE>Backup Software-Filesystems>SN-TP: SAMQFS
  •  
  • .Old GCS Categories>Sun Microsystems>Storage Software>Data Management Software - Tape
  •  

PreviouslyPublishedAs
217109


Applies to:

Sun Storage L25 Tape Library
Sun QFS and Storage Archive Manager (SAM) - Version: 3.5 to 4.1   [Release: to 4.0]
All Platforms
***Checked for relevance on 04-Aug-2011***

Goal

The robotic emulation for the Sun StorEdge L25 Tape Library and Sun StorEdge L100 Tape Library is configurable via the front panel of the library. For Sun[TM] libraries, the default vendor and product strings should be "M4 DATA" and "MagFile" respectively. However, if purchased by a 3rd party, any one of the 3 emulation types could be configured:
"M4 DATA" "MagFile" "ATL" "1500" "ATL" "M2500"

The vendor and product strings can be seen in the device logs if SAM-FS has already tried to initialize the library:

2004/10/12 18:00:02*0000 Initialized. rb 2004/10/12 18:00:02*1002 Device is M4 DATA , MagFile 2004/10/12 18:00:02*1003 Serial JGE25A0131, rev 3.073.07

If the 'M4 DATA' entry is missing from the inquiry.conf(4), then the following error may be seen:

2004/10/12 18:00:02*0000 Initialized. rb 2004/10/12 18:00:02*1002 Device is M4 DATA , MagFile 2004/10/12 18:00:02*1011 Error: Unknown device: Update /etc/opt/SUNWsamfs/inquiry.conf (see inquiry.conf(4) 2004/10/12 18:00:02*1009 Changing state to OFF

Solution

The "1500" and "M2500" strings are already present in the inquiry.conf(4). And, starting in SAM-QFS 4.2, the "M4 DATA" emulation type is already included as well. However, previous versions of SAM-FS will require you to add the next line manually :
"M4 DATA", "MagFile", "atl1500" # Sun L25 tape library

As an example, the 4.2 inquiry.conf(4) has the following:

"ATL", "1500", "atl1500" # ATL M1500 tape library "ATL", "M2500", "atl1500" # ATL M2500 tape library "M4 DATA", "MagFile", "atl1500" # Sun L25 tape library

Once this file has been edited, run 'samd config' to reread this file and recognize the change.

# samd config



last review : Aug 4 2011 - Gio Geens

L25, SAM-FS, SAMFS, SAM-QFS, SAMQFS, initialization, initialisation, inquiry.conf, m4 data, l100, magfile
Previously Published As
78815

Change History
Date: 2006-01-23
User Name: 71396
Action: Update Canceled
Comment: *** Restored Published Content *** from ssh audit update
Version: 0
Date: 2006-01-23
User Name: 71396
Action: Update Started
Comment: Updating per SSH audit
Version: 0
Date: 2005-06-08
User Name: 25440
Action: Approved
Comment: Publishing.
Version: 9
Internal Comments
Oracle review 11/5/09


Attachments
This solution has no attachment
  Copyright © 2012 Sun Microsystems, Inc.  All rights reserved.
 Feedback