Sun Fire[TM] v1280, E2900, and Netra 1280, 1290: Lights Out Management (LOM) Quick Command Reference

Asset ID:	1-71-1012388.1
Update Date:	2012-07-30
Keywords:

Solution Type Technical Instruction Sure

Solution 1012388.1 : Sun Fire[TM] v1280, E2900, and Netra 1280, 1290: Lights Out Management (LOM) Quick Command Reference

Applies to:

Sun Fire E2900 Server
Sun Netra 1280 Server
Sun Fire V1280 Server
All Platforms

Goal

Sun Fire[TM] v1280, E2900, and Netra 1280, 1290: Lights Out Management (LOM) Quick Command Reference
This is a quick reference for the syntax of LOM commands only. These commands are executed at the lom prompt on the system controller, not in Solaris. For more information on each command please see the Sun Fire Entry-Level Midrange System Controller Command Reference Manual

Solution

Commands:

bootmode - Configure the way Solaris boots at the next reboot.

bootmode normal
bootmode [diag|skipdiag] [forth] [reset_nvram] bootmode -h

break - Send a break signal to the Solaris console.

break [-y|-n]
break -h

console - Connect to the Solaris/OpenBoot PROM console.

console
console -h

disablecomponent - Add a component to the blacklist.

disablecomponent [ . . .]
disablecomponent -h

enablecomponent - Remove a component from the blacklist.

enablecomponent [ . . .]
enablecomponent -h

flashupdate - Update the flash PROMs in the System Controller, all the system boards, or a specified board number.

flashupdate [-y|-n] -f all
flashupdate [-y|-n] -f systemboards|scapp|rtos| ...
flashupdate [-y|-n] -u
flashupdate [-y|-n] -c
flashupdate -h

help - Without arguments, list all available LOM commands. When an argument is supplied, display basic usage of the specified command and a short description.

help []
help []
help -h

history - Display the command history along with date and time stamps.

history
history -h

inventory - Display SEPROM contents of a FRU.

inventory
inventory []
inventory -h

logout - Log out from this connection.

logout
logout -h

password - Set the password for the LOM.

password
password -h

poweroff - Forcibly power off the whole system to standby, or a FRU, or a list of FRUs.

poweroff
poweroff [-y|-n]
poweroff [-y|-n] [...]
poweroff -h

poweron - Power on the entire system, or a FRU, or a list of FRUs.

poweron
poweron [all| [...]]
poweron -h

reset Reset the Solaris system .

reset [-x|-a] [-y|-n]
reset -h

resetsc - Reset the System Controller.

resetsc [-y|-n]
resetsc -h

setalarm - Set the system alarm relays and associated LEDS.

setalarm 1|2 on|off
setalarm -h

setdate - Set the date and time for the system.

setdate [-v] [-t ] []
setdate [-v] [-t ] [[]]][.]
setdate [-v] -r
setdate [-v] -t GMT<+|->
setdate -h

setescape - Set the sequence of characters used to switch from the Solaris or OpenBoot PROM console to the LOM prompt.

setescape
setescape -h

seteventreporting - The seteventreporting command controls which messages are printed at the LOM prompt and the level of logged messages sent to Solaris.

seteventreporting on [0|1|2|3|4]

seteventreporting off [0|1|2|3|4]
seteventreporting default [0|1|2|3|4]
seteventreporting -h

setlocator - Set the state of the system Locator LED.

setlocator on|off
setlocator -h

setupnetwork - Set up System Controller network attributes.

setupnetwork
setupnetwork -h

setupsc - Configure optional System Controller features.

setupsc
setupsc -h

showalarm - Display state of system alarm relays and LEDs.

showalarm 1|2|system
showalarm -h

showboards - Display the status for all boards in the system

showboards [-ev] [-p ] ...
showboards -h

showcomponent - Display a component or a list of components.

showcomponent [-v] [ . . . ]
showcomponent -h

showdate - Display the current date and time for the system.

showdate [-tv]
showdate -h

showenvironment - Display the current environmental status, temperatures, voltages, fan status, and so on, for the system..

showenvironment [-ltuvw] [-p ] []
showenvironment [-ltuvw] []
showenvironment -h

showescape - Display the current escape sequence.

showescape
showescape -h

showeventreporting - Display the settings applied to the LOM software event reporting and messages.

showeventreporting
showeventreporting -h

showfault - Display the state of the system Fault LED.

showfault
showfault -h

showhostname - Display the system hostname.

showhostname
showhostname -h

showlocator - Display the state of the system Locator LED.

showlocator
showlocator -h

showlogs - Display the message event log.

showlogs
showlogs -h

For systems configured with enhanced-memory SCs (SC V2s), the following command shows the system error contents maintained in the persistent buffer.

showerrorbuffer -p
showlogs -p

showmodel - Display the platform model.

showmodel
showmodel -h

shownetwork - Display System Controller (LOM) network settings and MAC addresses.

shownetwork [-v]
shownetwork -h

showresetstate - Display the CPU registers after an abnormal Solaris reset.

showresetstate [-w|-s|-v] [-f ]

showresetstate -h

showsc - Display version and uptime information about the System Controller.

showsc [-v]
showsc -h

shutdown - Shut down Solaris and enter standby mode.

shutdown

shutdown -h

testboard - Test the specified CPU/Memory board.

testboard [-f]
testboard -h

To discuss this information further with Oracle experts and industry peers, we encourage you to review, join or start a discussion in an appropriate
My Oracle Support Community - Oracle Sun Technologies Community.

Product
Sun Fire V1280 Server
Sun Fire E2900 Server
Netra 1280 Server
Netra 1290 Server

Keywords
lw8, commands, help, lom>, lom, showboards, showlogs, sc

Attachments

This solution has no attachment