|
Commands
|
Options
|
Descriptions
|
|
poweron
|
None
|
Applies power to the managed system
|
|
poweroff
|
-y, -f
|
Shuts down the managed system to the powered off state
|
|
reset
|
-y, -x
|
Resets the managed system
|
|
break
|
-y
|
Causes the SC to send a break to the managed system OS which
causes Solaris OE to drop into either kadb or OBP depending on the
mode in which Solaris OE was booted.
|
|
bootmode
|
normal
|
Provides control over the managed system OBP firmware behavior
during system initialization
|
|
|
reset_nvram
|
|
|
|
diag
|
|
|
|
skip_diag
|
|
|
console
|
-f
|
Connects this user session to the managed system.
|
|
consolehistory
|
-b lines
|
Displays the contents of the selected OS console output buffer
for the managed system.
|
|
|
-e lines
|
|
|
|
-g lines
|
|
|
|
-v
|
|
|
|
boot|run
|
|
|
showlogs
|
-b lines
|
Displays the contents of the managed system eventlog
|
|
|
-e lines
|
|
|
|
-g lines
|
|
|
|
-v
|
|
|
setlocator
|
on, off
|
Causes SC to turn the managed system locator indicator on or
off
|
|
showlocator
|
None
|
Displays the managed system locator indicator current state
|
|
showenvironment
|
-v
|
Displays the environmental status information available to the
SC for the managed system
|
|
showfru
|
None
|
Prints out the FRU-ID data stored in the FRU PROM
|
|
showplatform
|
-v
|
Displays the details from the SC of the hardware configuration
of the platform and whether that hardware is providing service
|
|
showsc
|
-v, param
|
Displays the details of the SC software configuration
|
|
shownetwork
|
-v
|
Displays the current network configuration parameters
|
|
setsc
|
param, value
|
Allows the user to individually configure SC parameters
|
|
showdate
|
None
|
Display the current SC date and time
|
|
setdate
|
mmdd|HHMM
|
Allows the user to set the current SC date and time
|
|
|
mmddHHMM
|
|
|
|
cc|yy
|
|
|
|
.SS
|
|
|
resetsc
|
-y
|
Reset the SC that is active and to which the user is interacting
through the CLI
|
|
flashupdate
|
-s IPaddr
|
Downloads a new firmware image to the active SC
|
|
|
-f pathname
|
|
|
|
-v
|
|
|
setdefaults
|
-y
|
Sets all the user settable SC configuration parameters to their
default value as they were set when the system was shipped out
|
|
useradd
|
username
|
Adds a new user to the SC's user database
|
|
userdel
|
username
|
Removes an exsisting user from the SC's user database
|
|
usershow
|
username
|
Displays the configuration details for a user account, if no
argument is supplied, the details for all accounts in the database
ars displyed
|
|
userpassword
|
username
|
Allows an administrator to set an initial password for a user or
to change an existing password without knowing the existing
password.
|
|
userperm
|
username c, u, a, r
|
Sets the permissions for the specified user for the managed
system.
|
|
password
|
None
|
Allows user to change their own login password
|
|
showusers
|
None
|
Displays a list of users currently logged into the SC
|
|
logout
|
None
|
Logs the current user out from his session with the CLI and
presents the login prompt over the interface
|
|
help
|
None
|
Provides assistance to the user of the CLI by listing the
commands available and their syntax and also by providing a short
description of the capabilities of each command.
|
|
