Sun Microsystems, Inc.  Sun System Handbook - ISO 4.1 October 2012 Internal/Partner Edition
   Home | Current Systems | Former STK Products | EOL Systems | Components | General Info | Search | Feedback

Asset ID: 1-71-1004207.1
Update Date:2012-07-30
Keywords:

Solution Type  Technical Instruction Sure

Solution  1004207.1 :   C4 - "Broken" Pulley in Robotics Module  


Related Items
  • Sun Storage C4 Tape Library
  •  
Related Categories
  • PLA-Support>Sun Systems>TAPE>Tape Hardware>SN-TP: OEM Drive and Library
  •  

PreviouslyPublishedAs
205823


Applies to:

Sun Storage C4 Tape Library - Version Not Applicable and later
All Platforms
Checked for relevance on 26-July-2012.

Goal

The C4 tape library has been occasionally misdiagnosed with a broken drive belt pulley.  In fact the pulley is designed with a cut out on it that is mistaken for a defect.

Fix

Steps to Follow
The C4 tape library has a robot mechanism for handling the tape cartridges.   One of the drive pulleys in that mechanism is designed with a notch on it.  Some people have mistakenly thought that was a broken pulley, when in fact it is manufactured that way.  The library is not defective and should not be replaced.  Verify the operation of the library using local diagnostics if in doubt.




Attachments
This solution has no attachment
  Copyright © 2012 Sun Microsystems, Inc.  All rights reserved.
 Feedback