Asset ID: |
1-72-1494017.1 |
Update Date: | 2012-09-27 |
Keywords: | |
Solution Type
Problem Resolution Sure
Solution
1494017.1
:
GW command showgwports: shows "Line 69, In ? Iport(i, Port) ValueError: Failed To Get Iport Attr"
Related Items |
- Oracle Exalogic Elastic Cloud X2-2 Hardware
|
Related Categories |
- PLA-Support>Database Technology>Engineered Systems>Oracle Exalogic>MW: Exalogic Core
|
In this Document
Created from <SR 3-6202874271>
Applies to:
Oracle Exalogic Elastic Cloud X2-2 Hardware - Version All Versions and later
Information in this document applies to any platform.
Symptoms
When running the command showgwports in one of the NM2-GW switches, resulting following error:
[root@elorl01gw01-adm ~]# showgwports
INTERNAL PORTS:
---------------
Device Port Portname PeerPort PortGUID LID IBState GWState
---------------------------------------------------------------------------
Bridge-0 1 Bridge-0-1 4 0x002128c376fac001 0x000b Active Up
Bridge-0 2 Bridge-0-2 3 0x002128c376fac002 0x002f Active Up
Traceback (most recent call last):
File "/usr/local/bin/showgwports", line 69, in ?
iport = pydcsgw.getiport(i, port)
ValueError: Failed to get iport attrs
Ideally, the epxected the output should be:
[root@elorl01gw01-adm ~]# showgwports
INTERNAL PORTS:
---------------
Device Port Portname PeerPort PortGUID LID IBState GWState
---------------------------------------------------------------------------
Bridge-0 1 Bridge-0-1 4 0x002128c376fac001 0x000b Active Up
Bridge-0 2 Bridge-0-2 3 0x002128c376fac002 0x002f Active Up
Bridge-1 1 Bridge-1-1 2 0x002128c376fac041 0x0035 Active Up
Bridge-1 2 Bridge-1-2 1 0x002128c376fac042 0x0055 Active Up
CONNECTOR 0A-ETH:
-----------------
Port Bridge Adminstate Link State Linkmode Speed
------------------------------------------------------------------------
0A-ETH-1 Bridge-0-2 Enabled Up Up XFI 10Gb/s
0A-ETH-2 Bridge-0-2 Enabled Up Up XFI 10Gb/s
0A-ETH-3 Bridge-0-1 Enabled Down Reset XFI 10Gb/s
0A-ETH-4 Bridge-0-1 Enabled Down Reset XFI 10Gb/s
CONNECTOR 1A-ETH:
-----------------
Port Bridge Adminstate Link State Linkmode Speed
------------------------------------------------------------------------
1A-ETH-1 Bridge-1-2 Enabled Down Reset XFI 10Gb/s
1A-ETH-2 Bridge-1-2 Enabled Down Reset XFI 10Gb/s
1A-ETH-3 Bridge-1-1 Enabled Down Reset XFI 10Gb/s
1A-ETH-4 Bridge-1-1 Enabled Down Reset XFI 10Gb/s
Changes
The issue was faced on InfiniBand Gateway Switch (NM2-GW), firmware version 2.0.4-1
[root@elorl01gw01-adm ~]# version
SUN DCS gw version: 2.0.4-1
Build time: Oct 17 2011 10:04:07
FPGA version: 0x34
SP board info:
Manufacturing Date: 2010.12.31
Serial Number: "XXXXXXXXX"
Hardware Revision: 0x0006
Firmware Revision: 0x0000
BIOS version: SUN0R100
BIOS date: 06/22/2010
Cause
This is a known issue and resolved through the Sun CR 7167619
Solution
The fix went into the version 2.1.2. Till the fix is available, a feasible solution is to restart the switch in question.
Attachments
This solution has no attachment