Sun Microsystems, Inc.  Sun System Handbook - ISO 4.1 October 2012 Internal/Partner Edition
   Home | Current Systems | Former STK Products | EOL Systems | Components | General Info | Search | Feedback

Asset ID: 1-72-1473831.1
Update Date:2012-09-13
Keywords:

Solution Type  Problem Resolution Sure

Solution  1473831.1 :   SL150 - What is the StorageTek SL150 Modular Tape Library Default Password for the Initial Config Wizard  


Related Items
  • StorageTek SL150 Modular Tape Library
  •  
Related Categories
  • PLA-Support>Sun Systems>TAPE>Tape Hardware>SN-TP: SL150 Library
  •  




In this Document
Symptoms
Cause
Solution


Applies to:

StorageTek SL150 Modular Tape Library - Version All Versions to All Versions [Release All Releases]
Information in this document applies to any platform.

Symptoms

 Can't find the default password that is needed fro the Initial Config Wizard on the SL150 library.

Cause

 Initial installation or a factory reset of the SL150 requires that the Initial Config Wizard be run.

Solution

 The default password set at the factory for the SL150 library that is needed in order to run the Initial Config Wizard is "passw0rd" (that is a zero not an upper case oh).


Attachments
This solution has no attachment
  Copyright © 2012 Sun Microsystems, Inc.  All rights reserved.
 Feedback