SL8500/SL3000 - Policy Routes Disable after Power Cycle of Library

Asset ID:	1-72-1339745.1
Update Date:	2011-07-20
Keywords:

Solution Type Problem Resolution Sure

Solution 1339745.1 : SL8500/SL3000 - Policy Routes Disable after Power Cycle of Library

Related Items


Sun StorageTek SL3000 Modular Library System
 Sun StorageTek SL8500 Modular Library System

Related Categories


PLA-Support>Sun Systems>TAPE>Tape Hardware>SN-TP: SL3000-8500 Library

In this Document
  Symptoms
  Changes
  Cause
  Solution

Oracle Confidential (PARTNER). Do not distribute to customers
Reason: Confidential for Partners and Oracle Support personnel

Applies to:

Sun StorageTek SL8500 Modular Library System - Version: Not Applicable and later [Release: N/A and later ]
Sun StorageTek SL3000 Modular Library System - Version: Not Applicable and later [Release: N/A and later]
Information in this document applies to any platform.

Symptoms

Policy Routes Disable after Power Cycle.
After power cycling the subsystem the Policy Rules change from ENABLED to DISABLED.

Changes

Power cycling the library.

Cause

Issue found in 2.81 and 6.x code versions.

Solution

Recovery is to use "network ip policy enable dev 2A" and "2B" commands to re-enable.

Specific command syntax to enable and check the policy statements and note policy routes are typically used with the dual tcp/ip feature.

network ip policy enable dev 2A
network ip policy enable dev 2B

network ip policy route show dev 2A
network ip policy route show dev 2B

This problem fixed in SL3000 FRS_3.00 code and in SL8500 FRS_7.01 code.

Provided by Bruce McDonald

Attachments

This solution has no attachment