Sun SPARC[TM] Enterprise M4000/M5000 - MBU_B and MEMB being faulted with SCF-8004-8X, SCF-8000-1D, and SCF-8005-MJ errors.

Asset ID:	1-72-1296435.1
Update Date:	2012-05-17
Keywords:

Solution Type Problem Resolution Sure

Solution 1296435.1 : Sun SPARC[TM] Enterprise M4000/M5000 - MBU_B and MEMB being faulted with SCF-8004-8X, SCF-8000-1D, and SCF-8005-MJ errors.

Applies to:

Sun SPARC Enterprise M5000 Server - Version Not Applicable and later
Sun SPARC Enterprise M4000 Server - Version Not Applicable and later
Information in this document applies to any platform.

Symptoms

Showlogs monitor have the following errors:

Jan 20 14:59:35 XSCF Warning: /UNSPECIFIED:SCF:spurious unit interrupt
Jan 20 15:00:00 XSCF last message repeated 11 times
Jan 20 15:01:53 XSCF Alarm: /MBU_B/MEMB#5:ANALYZE:MAC detected clock fatal failure
Jan 20 15:02:41 XSCF Warning: /MBU_B:SCF:SC test error
Jan 20 15:02:57 XSCF Warning: /MBU_B:SCF:SC test error
Jan 20 15:03:16 XSCF Warning: /MBU_B:SCF:SC test error
Jan 20 15:03:17 XSCF Warning: /MBU_B:SCF:SC test error

FMA will record these same events as:

Jan 20 20:59:48.7163 051fbd14-0465-492b-aa42-6a705e31f05f SCF-8004-8X
Jan 20 21:01:46.3456 10355763-1a55-424c-ba69-bd2f3789e3d4 SCF-8000-1D
Jan 20 21:02:26.2880 12bdb2c7-6b8c-49ff-b37f-0ec60d958d40 SCF-8005-MJ
or
Jan 20 20:59:48.7163 ereport.chassis.SPARC-Enterprise.asic.cpu.power.intr-fail
Jan 20 21:01:46.3456 ereport.chassis.SPARC-Enterprise.if.fe-asic-clk
Jan 20 21:02:26.2880 ereport.chassis.SPARC-Enterprise.asic.sc.test

The error to note is the SCF-8000-1D which is a clock distribution error.

Cause

Power is supplied to the MEMB and the system clock by IOU#0.

Solution

Contact your service provider, this is a known condition that will require replacement hardware.

The FMA messages in XCP 1111 now include the IOU as a suspect component.

If system is below XCP 1111 then an XCP upgrade should be scheduled.

IOU#0 should be replaced by an authorized service provider.

The faulted component are not faulty and should not be replaced.

Use service mode to clearfault all faulted components, which should include the MBU and a MEMB.

Action Plan should include a pointer to :
Sun SPARC(R)Enterprise M3000/M4000/M5000/M8000/M9000 (OPL) Servers: Fault clearing and LEDs behavior (Doc ID 1007101.1) and include the service mode password if possible.

References

@<NOTE:1007101.1> - Sun SPARC(R)Enterprise M3000/M4000/M5000/M8000/M9000 (OPL) Servers: Fault clearing and LEDs behavior

Attachments

This solution has no attachment