Sun Microsystems, Inc.  Sun System Handbook - ISO 4.1 October 2012 Internal/Partner Edition
   Home | Current Systems | Former STK Products | EOL Systems | Components | General Info | Search | Feedback

Asset ID: 1-72-1013256.1
Update Date:2012-07-30
Keywords:

Solution Type  Problem Resolution Sure

Solution  1013256.1 :   SL8500 - Popping Noise Occurs While Robot Moving Around Library  


Related Items
  • Sun StorageTek SL8500 Modular Library System
  •  
Related Categories
  • PLA-Support>Sun Systems>TAPE>Tape Hardware>SN-TP: SL3000-8500 Library
  •  

PreviouslyPublishedAs
218380


Applies to:

Sun StorageTek SL8500 Modular Library System - Version: Not Applicable and later    [Release: N/A and later]
All Platforms
Checked for relevance on 15-Mar-2011.

Symptoms

Excessive noise during robotic move
Popping noise occurs while robot moving around track
Robot may bind during movement around track

Changes

{CHANGE}

Cause

Gear track not seated properly.

Solution

Resolution
Ensure all gear track pieces are snapped firmly into extrusion channels.

Refer to SL8500 Manual P/N 96138, Chapter-5, for details on proper installation of Geared Track.



@ SL8500, Gear Track pieces not snapped into extrusion channels correctly., Gear track, New Installation, Robot install, S-bot, Track rail, Extrusion channel
Previously Published As STKKB41114


Attachments
This solution has no attachment
  Copyright © 2012 Sun Microsystems, Inc.  All rights reserved.
 Feedback