Sun Microsystems, Inc.  Sun System Handbook - ISO 4.1 October 2012 Internal/Partner Edition
   Home | Current Systems | Former STK Products | EOL Systems | Components | General Info | Search | Feedback

Asset ID: 1-72-1012474.1
Update Date:2012-07-30
Keywords:

Solution Type  Problem Resolution Sure

Solution  1012474.1 :   L25/L100 - Jbconfig: Jukebox error: Library is becoming ready or not on-line  


Related Items
  • Sun Storage L25 Tape Library
  •  
  • Sun Storage L100 Tape Library
  •  
Related Categories
  • PLA-Support>Sun Systems>TAPE>Tape Hardware>SN-TP: STK Legacy Drive and Library
  •  

PreviouslyPublishedAs
217188


Applies to:

Sun Storage L100 Tape Library - Version Not Applicable and later
Sun Storage L25 Tape Library - Version Not Applicable and later
All Platforms
Checked for relevance on 3-July-2012.
EOL Products. Set this KB to Archive.

Symptoms

Jbconfig gives error jbconfig: jukebox error: Library is becoming ready or not online.

Changes

{CHANGE}

Cause

{CAUSE}

Solution

Resolution
Solution is to change the emulation mode of the jukebox.
In this case, the error occurred in the Sun StorEdge[TM] L25 tape library.  Customer had the wrong emulation setting M4 instead of M1500. Need to set it to M1500 so that the jukebox inquiry string reports the mode correctly.

L100 tape library can also have the same problem and emulation for that is M2500.

The Emulation option allows you to set the library to act as either a Quantum ATL library or an M4 Data Library.

To set the emulation:

  1. Access the Configuration screen.

  2. Press the Up or Down buttons until Emulation is highlighted.

  3. Press Select .

  4. Use the Up or Down buttons to select the desired Emulation Setting. The available settings are ATL M2500, ATL 1500 and M4 Data. Note: The default setting for the L25 is  M4 Data; the default setting for the L100 is ATL M2500.

  5. Press Select .

To return to the Configuration Screen without changing the option setting, press Cancel .

  1. Press Main to return to the main screen.

Note: You must reboot the library before this setting will take effect.

 

Refer to Sun Storage L25/L100 Tape library User's Guide for changing any of the Library Configuration.




Attachments
This solution has no attachment
  Copyright © 2012 Sun Microsystems, Inc.  All rights reserved.
 Feedback