![]() | Sun System Handbook - ISO 4.1 October 2012 Internal/Partner Edition | ||
|
|
![]() |
||||||||||||
Solution Type Problem Resolution Sure Solution 1011562.1 : C4 Tape Library - How to Solve Character Echo Problem
PreviouslyPublishedAs 215870 Oracle Confidential (PARTNER). Do not distribute to customers. Reason: Confidential information provided to Oracle and Partner Service Personnel Applies to:Sun Storage C4 Tape Library - Version Not Applicable and laterAll Platforms Checked for relevance on 26-July-2012. SymptomsWhen a telnet session to Oracle StorageTek[TM] C4 Tape Library is opened, double characters are shown while Username is entered at the login prompt. Changes{CHANGE} Cause{CAUSE} SolutionResolution Problem Example: # telnet Connected to Escape character is '^]'. *** PX500 Debug Terminal 45198 *** Connection ID 0 login: sseerrvviicece password:xxxxx PX500> llooggoouutt The solution is to enable LINEMODE after opening the telnet session to the StorageTek C4 Tape Library. The procedure is as below: # telnet Connected to Escape character is '^]'. *** PX500 Debug Terminal 45198 *** Connection ID 0 (Use escape character '^]' to enter telnet command mode) login: ^] telnet> mode line login: service service password: xxxxx Note:
Attachments This solution has no attachment |
||||||||||||
|