Sun System Handbook - ISO 3.4 June 2011 Internal/Partner Edition | |||
|
|
Solution Type Troubleshooting Sure Solution 1020019.1 : Troubleshooting LDOM jumpstart issues
PreviouslyPublishedAs 250929 Description This document would explain the details of required steps to troubleshoot LDOM jumpstart issues Symptoms: One or more of the following are observed or described when LDOM jumpstart issues are seen: * Confirm network settings are correct * Verify Ethernet address for LDOM * Disk Configuration * Right cpu architecture is specified * Appropriate LDOM resources are assigned to domains Purpose/Scope: This document describe in the context during guest domain creation. Adding of resources to an active domain can also fail due to lack of additional resources to be assigned to a domain. The corrective actions are the same as described here. Related Documents: For more information on creation of LDoms guest domains, please refer to following references: - Beginners Guide to LDOMs (820-0832) availabe at http://www.sun.com/blueprints. - Logical Domains (LDoms) X.X.X Administration Guides, which are available on http://www.oracle.com/technetwork/documentation/vm-sparc-194287.html . Additional information specific to the software release is available in the LDOMs Release Notes. Up to date information on LDoms is available at Oracle VM for SPARC Documentation Steps to Follow Please validate that each troubleshooting step below is true for your environment. The steps will provide instructions or a link to a document, for validating the step and taking corrective action as necessary. The steps are ordered in the most appropriate sequence to isolate the issue and identify the proper resolution. Please do not skip a step Before attempting the following steps, please ensure the user account used has the appropriate RBAC profiles for LDOMs Management. The user either has to have to "LDoms Management" profile or just login as root. For more information on user authorization, please refer to the Security chapter of the LDoms Administration Guide. Step 1. Network configuration issue. See <Document: 1020018.1> Confirm network settings are correct. Step 2. Ethernet mac address See <Document: 1020017.1> Verify Ethernet address for LDOM. Step 3. Disk Configuration. See <Document: 1020008.1> Steps to verify Disk configuration. Step 4. Wrong Architecture See <Document: 1019984.1> Steps to confirm the right cpu archictecture is specified when Jumpstarting Txxxx (sun4v) server Step 5. Verify that VCPU/MAU resources are available for binding to the domain. See <Document: 1019983.1> Steps to ensure proper binding of resources to LDOM domains. At this point, if you have validated that each troubleshooting step above is true for your environment, and the issue still exists, further troubleshooting is required. Provide an Explorer output and open a Service Request. See <Document: 1020212.1> Data Collection for troubleshooting LDom issues. Product Logical Domain Manager 1.0.1 Sun Fire T2000 Server Sun Fire T1000 Server Sun Netra T2000 Server Sun Netra T5220 Server Sun Netra T5440 Server Netra T5220 AC Sun SPARC Enterprise T5220 Server Sun SPARC Enterprise T5240 Server Sun Blade T6300 Server Module Sun Blade T6320 Server Module Sun SPARC Enterprise T5120 Server Sun SPARC Enterprise T5140 Server Sun Blade T6340 Server Module Sun SPARC Enterprise T2000 Server Sun SPARC Enterprise T5440 Server Sun SPARC Enterprise T1000 Server Internal Comments This document contains normalized content and is managed by the the Domain Lead (s) of the respective domains. To notify content owners of a knowledge gap contained in this document, and/or prior to updating this document, please contact the domain engineers that are managing this document via the "Document Feedback" alias(es) listed below: Domain Lead: Normalization Lead: [email protected] Normalized, ldom, ldm, guest , domain, network, issues, vnet, vsw, vswitch, virtual network interface, hyrbrid I/O, DHCP, audited Attachments This solution has no attachment |
||||||||||||
|