How to Replace a Fabric Expansion Module in a X6270:ATR:2306:0

Asset ID:	1-71-1319791.1
Update Date:	2011-05-06
Keywords:

Solution Type Technical Instruction Sure

Solution 1319791.1 : How to Replace a Fabric Expansion Module in a X6270:ATR:2306:0

Applies to:

Sun Blade X6270 Server Module - Version: Not Applicable and later [Release: N/A and later ]
Information in this document applies to any platform.

Goal

How to remove and replace a Fabric Expansion Module (FEM) in a Sun Blade X6270 Server Module

Solution

DISPATCH INSTRUCTIONS

WHAT SKILLS DOES THE ENGINEER NEED:(IS A SITE ENGINEER AVAILABLE?)
Field Engineer skills

DELIVERY REQUIREMENT:
Schedule with maintenance window

Estimate AP Duration = 0.5 hours

FIELD ENGINEER INSTRUCTIONS

WHAT STATE SHOULD THE SYSTEM BE IN TO BE READY TO PERFORM THE RESOLUTION ACTIVITY? :

WHAT ACTION DOES THE ENGINEER NEED TO TAKE:
Replace a FEM Card

1. Power off the server and remove the server from the chassis.
Caution - After removing the server from the chassis insert a filler panel into an empty slot to reduce the possibility of a system shutdown.
2. Remove the cover from the server.
3. Perform one of the following:
* Remove the existing FEM board.
or
* Remove protective shipping cap from the FEM connector.
4. Perform the following steps to install the FEM board:
a. Slide the FEM board at an angle into the support bracket
b. Press the FEM board carefully into the connector.
5. Install the cover on the server.

OBTAIN CUSTOMER ACCEPTANCE

WHAT ACTION DOES THE CUSTOMER NEED TO TAKE TO RETURN THE SYSTEM TO AN OPERATIONAL STATE:

PARTS NOTE:

REFERENCE INFORMATION:

Service Manual: http://download.oracle.com/docs/cd/E19658-01/

Attachments

This solution has no attachment