How to Replace a REM Battery in a X6270:ATR:2304:0

Asset ID:	1-71-1319788.1
Update Date:	2011-05-06
Keywords:

Solution Type Technical Instruction Sure

Solution 1319788.1 : How to Replace a REM Battery in a X6270:ATR:2304:0

Applies to:

Sun Blade X6270 Server Module - Version: Not Applicable and later [Release: N/A and later ]
Information in this document applies to any platform.

Goal

How to remove and replace a RAID Expansion Module Battery in a Sun Blade X6270 Server Module

Solution

DISPATCH INSTRUCTIONS

WHAT SKILLS DOES THE ENGINEER NEED:(IS A SITE ENGINEER AVAILABLE?)
Field Engineer skills

DELIVERY REQUIREMENT:
Schedule with maintenance window

Estimate AP Duration = 0.5 hours

FIELD ENGINEER INSTRUCTIONS

WHAT STATE SHOULD THE SYSTEM BE IN TO BE READY TO PERFORM THE RESOLUTION ACTIVITY? :
WHAT ACTION DOES THE ENGINEER NEED TO TAKE:

Replace a REM Battery on the REM Card

1. Remove the cover from the server.
2. Disconnect the REM cable and remove the REM card from the chassis.
3. Remove the REM battery from the REM card by removing the four screws securing the old REM battery to the card.
4. Attach the new battery to the REM card with four screws.
5. Install the cover on the server.

Replace a REM Battery on the Motherboard

1. Remove the cover from the server.
2. Remove the two screws securing the battery to the bracket (see FIGURE 3-16).
3. Place the new battery on bracket and attach it using the two screws.
4. Plug the battery cable into the motherboard.
5. Install the cover on the server.

OBTAIN CUSTOMER ACCEPTANCE

WHAT ACTION DOES THE CUSTOMER NEED TO TAKE TO RETURN THE SYSTEM TO AN OPERATIONAL STATE:

PARTS NOTE:

REFERENCE INFORMATION:

Service Manual: http://download.oracle.com/docs/cd/E19658-01/

Attachments

This solution has no attachment