SL500 - How to Change CAP From I/O to Storage Cell Function

Asset ID:	1-71-1319385.1
Update Date:	2011-05-04
Keywords:

Solution Type Technical Instruction Sure

Solution 1319385.1 : SL500 - How to Change CAP From I/O to Storage Cell Function

Applies to:

Sun StorageTek SL500 Modular Library System - Version: Not Applicable and later [Release: N/A and later ]
Information in this document applies to any platform.

Goal

SL500 - How to Change CAP From I/O to Storage Cell Function

Solution

To change the function of the CAP (Cartridge Access Port) from I/O (Input/Output) operation to Storage cells, the following must be done:

Log in to CLI port.
Enter the command: cap x io or storage (x = module number)

Example: cap 1 storage
cap 1 io

A reboot of the SL500 is needed to enable the change. The default of the CAP is I/O.
A Field Service Representative is required to enable this function. It is not available via SL Console.

Refer to the SL500 Installation Manual, Chapter 4, Configuring the Library, for command information.

Attachments

This solution has no attachment