Sun System Handbook - ISO 3.4 June 2011 Internal/Partner Edition | |||
|
|
Solution Type Technical Instruction Sure Solution 1310119.1 : How to Replace a V445 XFP Card:ATR:1113:0
In this Document
Applies to:Sun Fire V445 Server - Version: Not ApplicableInformation in this document applies to any platform. GoalHow to remove and replace a Sun Fire V445 XFP Card
SolutionDISPATCH INSTRUCTIONSWHAT SKILLS DOES THE ENGINEER NEED:(IS A SITE ENGINEER AVAILABLE?) Nothing beyond basic partner training to be qualified as a Sun Service Delivery Partner. DELIVERY REQUIREMENT: Schedule for immediate delivery within contractual terms. TIME ESTIMATE: 30 mins FIELD ENGINEER INSTRUCTIONS PROBLEM OVERVIEW: Faulty XFP card WHAT STATE SHOULD THE SYSTEM BE IN TO BE READY TO PERFORM THE RESOLUTION ACTIVITY? : A data backup is not a pre-requisite but is a wise precaution Customer should conduct an orderly software system shutdown Power down System & disconnect Power Cords WHAT ACTION DOES THE ENGINEER NEED TO TAKE: 1. Identify the correct interface & Unplumb the interface using below command from OS #ifconfig ce0 unplumb 2. Powering off the system 3. Remove the top cover 4. Disconnect any external cables attached to the faceplate of the XFP card. 5. Release the latch securing the XFP card to the chassis. 6. Pull the XFP card from its slot 7. Place the XFP card on an antistatic mat 8. Install the new XFP card into its slot 9. Rotate the latch down and secure it with the retaining pin. 10.If necessary, connect any external cables to the XFP card. 11.Install the top cover. 12.Power on the system OBTAIN CUSTOMER ACCEPTANCE WHAT ACTION DOES THE CUSTOMER NEED TO TAKE TO RETURN THE SYSTEM TO AN OPERATIONAL STATE: Boot the system and start the application as per the sys admin procedure PARTS NOTE: REFERENCE INFORMATION: Sun Fire V445 Server Service Manual. http://download.oracle.com/docs/cd/E19088-01/ Attachments This solution has no attachment |
||||||||||||
|