Sun System Handbook - ISO 3.4 June 2011 Internal/Partner Edition | |||
|
|
Solution Type Technical Instruction Sure Solution 1310111.1 : How to replace a V245 Power Cord Kit:ATR:1238:0
In this Document
Applies to:Sun Fire V245 Server - Version: Not ApplicableInformation in this document applies to any platform. GoalHow to replace a V245 Power Cord KitSolution*DISPATCH INSTRUCTIONS*WHAT SKILLS DOES THE ENGINEER NEED:(IS A SITE ENGINEER AVAILABLE?) No specific skills required DELIVERY REQUIREMENT: As scheduled *FIELD ENGINEER INSTRUCTIONS* PROBLEM OVERVIEW: Faulty Power Cord WHAT STATE SHOULD THE SYSTEM BE IN TO BE READY TO PERFORM THE RESOLUTION ACTIVITY? : A data backup is not a pre-requisite but is a wise precaution. The customer is not required to perform a system shutdown. WHAT ACTION DOES THE ENGINEER NEED TO TAKE: 1. Identify which power cord you will replace. Each power supply has three LEDs that you can view from the rear of the server: Top LED is on (green): Power supply is operating properly Middle LED is on (amber): Power supply is faulty and should be replaced Bottom LED is on (green): Power source to power supply is operating properly 2. Disconnect the power cord from the power supply that you are replacing 3. Install replacement power cord WHAT ACTION DOES THE CUSTOMER NEED TO TAKE TO RETURN THE SYSTEM TO AN OPERATIONAL STATE: Check that LEDs show PSU for which cord was replaced is functioning. PARTS NOTE: REFERENCE INFORMATION: Service Manual. http://docs.sun.com/app/docs/doc/819-3038-11 TIME ESTIMATE: 15 Minutes Attachments This solution has no attachment |
||||||||||||
|