Asset ID:	1-71-1270963.1
Update Date:	2010-12-10
Keywords:

---

Solution Type  Technical Instruction Sure

Solution  1270963.1 :   Sun Fire V240 Action Plan: System Configuration Card Replacement (ATR-0749) [Video]  

In this Document
  Goal
  Solution

---

Applies to:

Sun Fire V240 Server - Version: Not Applicable and later   [Release: NA and later ]
Information in this document applies to any platform.

Goal

Video - Sun Fire V240 Action Plan: System Configuration Card Replacement (2:15)

Solution

PROBLEM OVERVIEW:
Configuration Card Failed

WHAT STATE SHOULD THE SYSTEM BE IN TO BE READY TO PERFORM THE RESOLUTION ACTIVITY? :

A data backup is not a pre-requisite but is a wise precaution.
The customer should conduct an orderly software system shutdown.

WHAT ACTION NEEDS TO BE TAKEN:

Ensure that the system configuration card is not removed before system is brought down.

Follow standard ESD procedures to avoid Electrostatic Discharge

Replace the part following the steps below, refererence the service manual below:

Remove the defective part:

1.Power off the server.
2.Ensure that the server is properly grounded.
3.Remove the front section of the cover assembly.
4.Remove the system configuration card.

Install the new part:

1.Install the system configuration card.

2. Replace the front cover assembly section

3. Power on the server.

WHAT ACTION DOES THE CUSTOMER NEED TO TAKE TO RETURN THE SYSTEM TO AN OPERATIONAL STATE:
Restart software applications per applicable administration guides to resume system operation.

PARTS NOTE:
Refer to the System Handbook.

REFERENCE INFORMATION:
https://support.oracle.com

Attachments

This solution has no attachment