Sun Microsystems, Inc.  Sun System Handbook - ISO 3.4 June 2011 Internal/Partner Edition
   Home | Current Systems | Former STK Products | EOL Systems | Components | General Info | Search | Feedback

Asset ID: 1-71-1181788.1
Update Date:2010-08-26
Keywords:

Solution Type  Technical Instruction Sure

Solution  1181788.1 :   Sun Storage 7110 Unified Storage System: How to configure unidirectional CHAP for Solaris iSCSI initiator  


Related Items
  • Sun Storage 7410 Unified Storage System
  •  
  • Sun Storage 7110 Unified Storage System
  •  
  • Sun Storage 7210 Unified Storage System
  •  
  • Sun Storage 7310 Unified Storage System
  •  
Related Categories
  • GCS>Sun Microsystems>Storage - Disk>Unified Storage
  •  




In this Document
  Goal
  Solution


Applies to:

Sun Storage 7110 Unified Storage System - Version: Not Applicable and later   [Release: NA and later ]
Sun Storage 7210 Unified Storage System - Version: Not Applicable and later    [Release: NA and later]
Sun Storage 7310 Unified Storage System - Version: Not Applicable and later    [Release: NA and later]
Sun Storage 7410 Unified Storage System - Version: Not Applicable and later    [Release: NA and later]
Information in this document applies to any platform.

Goal

To configure unidirectional CHAP for Solaris iSCSI initiator.

Solution

In the case of unidirectional CHAP, initiator will provide the CHAP user name and secret to the target.

On your Solaris iSCSI initiator host use the following steps to enable CHAP

# iscsiadm modify initiator-node -a chap
# iscsiadm modify initiator-node -H initchap
# iscsiadm modify initiator-node -C  <- Set a password of length 12 to 16 characters.

Note down the 'Initiator node name' using the following command for later use

# iscsiadm list initiator-node

Now login to your Sun Storage 7000,  identify the above iSCSI initiator iqn in the list of iqn(s) under
Configuration -> SAN -> Initiator -> iSCSI Initiator
and click the pencil icon to edit
(Hint: move the mouse over the iqn in question to see the pencil icon)

[ Note: If the initiator is not yet added and is not in the list, you may add it now, by using the icon '+' next to 'iSCSI Initiator' and provide the iqn which was noted above ].

Fill in the following CHAP details

Use CHAP              <- tick
Initiator CHAP name   <- initchap (same as above)
Initiator CHAP secret <- (same as above)
Click 'ok'

Now back on the Solaris iscsi initiator host, perform the discovery.

# iscsiadm modify discovery -t enable
OR
# iscsiadm modify discovery -s enable

Check to see if the mapped target(s) and lun(s) are enumerated.

# iscsiadm list target -S



Attachments
This solution has no attachment
  Copyright © 2011 Sun Microsystems, Inc.  All rights reserved.
 Feedback