Sun Storage[TM] 6580/6780 Firmware Matrix

Asset ID:	1-71-1022298.1
Update Date:	2011-05-23
Keywords:

Solution Type Technical Instruction Sure

Solution 1022298.1 : Sun Storage[TM] 6580/6780 Firmware Matrix

Applies to:

Sun Storage 6780 Array - Version: Not Applicable and later   [Release: N/A and later ]
Sun Storage 6580 Array - Version: Not Applicable and later    [Release: N/A and later]
Sun Storage Common Array Manager (CAM) - Version: 6.2 and later    [Release: 6.0 and later]
All Platforms

Goal

To discuss this information further with Oracle experts and industry peers, we encourage you to review, join or start a discussion in the My Oracle Support Community, Storage Disk 6000 and 2000 Series RAID Arrays Community.

This article documents Sun Storage 6580/6780 Array's components firmware baseline bundled in each corresponding CAM release and patched versions.

This document assumes the relevant array product is managed with Common Array Manager. This reference can be used by end-user and all levels of support personnel for purpose of verifying component firmware and management software compatibility.

For instructions to download CAM, please refer to <Document 1296274.1> How to Download Common Array Manager (CAM) Software and Patches.

Solution

Sun Storage 6580/6780 Firmware
CAM release	Patch	Controller		Expansion
CAM release	Patch	Firmware	NVSRAM	CSM200	CSM100 FC	CSM100 SATA
CAM release	Patch	Firmware	NVSRAM	CSM200	CSM100 FC	CSM100 SATA
CAM release	Patch	Controller		Expansion
	No Support
1.x
2.x
5.x
6.0.x
6.1.x
					No Support
6.2.0.13		07.30.22.10	N7091-730843-004	98C1
6.2.0.14	140064-01 140066-01 140065-01	J4000 API update, required by 14006[012]-01; CAM L10N and IPv6 bug fixes, up-rev'd CAM to 6.2.0.14.
6.2.0.14	140060-01 140061-01 140062-01	Crystal_M1 update; J4000 firmware update, requires 14006[465]-01; 2530_exmoor.properties fix.
6.2.0.14	140064-02 140066-02 140065-02	Fixes unable to apply -01 on cli only install; patch readme errors.
6.2.0.14	140060-02 140061-02 140062-02	New ST31000NS fw SU0D for J4000. Include all fixes in -01.
6.3.0		CAM 6.3 was never released.
6.4.0.10		07.50.08.10	N7091-750843-003	98C4	9682	9728
6.4.1.5		07.50.13.10	N7091-750843-003	98C4	9682	9728
6.4.1.5	141484-01 141485-01 141486-01	Firmware patch for F5100.
6.5.0.10		07.60.18.10	N7091-760843-003	98C5	9682	9728
6.5.0.11	141581-01	CAM core patch for Windows only, fix for J4500 fw update failure.
6.5.0.x	controlled	(07.30.22.10) (07.50.xx.xx) (07.60.18.10)	N7091-730843-049^a N7091-750843-039^a N7091-760843-039^a
6.5.0.x	142798-01 142799-01 142800-01	Firmware patch for 2500 ExmoorM2; J4000 Seagate drive SU0E.
6.5.0.13	141580-02 141581-02 141582-02	CAM core patch -02; various fixes.
6.5.0.13	142798-02 142799-02 142800-02	Seagate firmware SU0F for J4200/4400, includes SU0E (retained for J4500) and ExmoorM2 for 2500 from firmware patch -01.
6.6.0.11^b		07.60.18.13	N7091-760843-004	98D0	9682	9728
6.6.0.12^b	141474-01^b 141475-01 141476-01	CR6935284 CAM BUI host types do not match array hostregion.
6.6.0.12	143759-01 143760-01 143761-01	07.60.36.10
6.7.0.12		07.60.36.13	N7091-760843-004	98D3	9682	9728
6.7.0.13	144861-01	CAM core patch for Windows only. Fixes CR6972298 Win2008 undefined constant; and CR6968739 J4410 reporting incorrect chassis serial number.
6.7.0.x	145965-01 145966-01 145967-01	F5100 LF1.0-ERIE firmware.
6.7.0.x	145965-02 145966-02 145967-02	07.60.53.10	Seagate drives firmware fixes for 6000/2500/J4000; 6000/2500 controller firmware fixes. Includes all previous fixes in 14596[567]-*.
6.7.0.x	145965-03 145966-03 145967-03	07.60.53.10	For F5100 FMOD firmware fixes FMODs zombie during db restore operation. Includes all previous fixes in 14596[567]-*.

^Note "controlled" items are not publicly available and are provided on case-by-case basis upon consultation with backline and/or engineering.

^a Temporary fix for CR6704575 PFA issue.

^b CAM 6.6.0.11 host types do not match array's host region (CR6935284), affecting 2500, 6140, 6180, 6540, 6580/6780. This may result in either new mappings selecting the wrong host region, or user confused by the display and change existing mappings which was correct, to become wrong. CAM 6.6.0.12 through patch 14147[456]-01 was specifically released to resolve this bug.

Internal website for CAM supported array firmware matrix.
http://tsc-storage.us.oracle.com/products/CAM/matrix.html
This site is typically updated first before being edited for public consumption.

Attachments

This solution has no attachment