Asset ID:	1-71-1015393.1
Update Date:	2011-05-09
Keywords:

---

Solution Type  Technical Instruction Sure

Solution  1015393.1 :   L700/180 - How TSM Works With Fast Load Enabled on Library  


PreviouslyPublishedAs
223569

Applies to:

Sun StorageTek L700 Tape Library
Sun StorageTek L1400 Tape Library - Version: Not Applicable and later    [Release: N/A and later]
Sun StorageTek L180 Tape Library - Version: Not Applicable and later    [Release: N/A and later]
All Platforms
Checked for relevance on 9-May-2011.

Goal

Fast load
How TSM works with Fast Load enabled on library
TSM
Tivoli Software Manager
Enabled

This information come via ISV Relations and IBM TSM Device Driver Development.

Solution

Steps to Follow
Fast load means that the library will return a move medium as successful to TSM as soon as the command is received by the library.

Once TSM "believes" the move is done, we will do rewinds and wait for the drive to come ready. This is how we tell the tape has "arrived" at the tape drive. On a large library where it may take some time for the tape to "arrive" at the drive, TSM will fail because the time between an "apparently" successful move medium and the tape arriving is too long. With fast load disabled, the move medium isn't reported as successful until it is "really" successful and the time for the tape drive to come ready is significantly shorter.

Previously Published As STKKB24827


Attachments

This solution has no attachment