SL500/SL8500 - Log Viewer Application to Review "Print log all" in the Library

Asset ID:	1-71-1014611.1
Update Date:	2011-03-16
Keywords:

Solution Type Technical Instruction Sure

Solution 1014611.1 : SL500/SL8500 - Log Viewer Application to Review "Print log all" in the Library

Applies to:

Sun StorageTek SL500 Modular Library System - Version: Not Applicable and later [Release: N/A and later]
Sun StorageTek SL8500 Modular Library System - Version: Not Applicable and later [Release: N/A and later]
All Platforms
Checked for relevance on 16-Mar-2011.

Goal

Log viewing tool to analyze SL500 and SL8500 Library Logs.

Solution

Steps to Follow
Troubleshooting Steps
Refer to document 1015680.1 for information on using this tool with SL8500 libraries.

The input file for the log viewer can be pulled via StreamLine Library Console.

After logging into SLC using your Service ID and Password:

Select Tools

Select Reports

Open Permanent Reports

Select Event Log

Select Save after the report is noted in the display window, may take a couple of minutes to download to your local PC.

Select *.txt as you file type, NOTE: the log viewer application can NOT input the default file type of HTML

Name and save the file to your local PC.

Where to get the Tool:

SL8500/SL500 SL Log View file is at:

https://tapesupport.us.oracle.com/tape_hw/tools_main.shtml

Log Viewer Manual:

Manual is attached below.

Note - Logs pulled through engineering access can also be viewed and parsed with this program.

For SL500

from CLI attach

run > print log all

Save file to your PC
Start Log viewer on your PC
direct file open to saved file
refer to Log Viewer manual for more options and procedures.

@ Library logs, Parsing logs, How to review logs from library, How to read Print Log All information from library, Print log all, Log viewer application, Log analysis, Trace analysis, Log viewing, SL500, SL8500, Library Logs
Previously Published As STKKB64931

Attachments

This solution has no attachment