Asset ID:	1-71-1014033.1
Update Date:	2011-04-27
Keywords:

---

Solution Type  Technical Instruction Sure

Solution  1014033.1 :   Lxxx - Pinout for Cable to Connect to the CSE Port  


PreviouslyPublishedAs
220241

Applies to:

Sun StorageTek L1400 Tape Library
Sun StorageTek L180 Tape Library
Sun StorageTek L20 Tape Library
Sun StorageTek L40 Tape Library
Sun StorageTek L700 Tape Library
All Platforms
Checked for relevance on 27-Apr-2011.

Goal

Pinout for Cable to Connect to the CSE Port.

Solution

Hyperterm port settings:

Set port setting to:

Baud rate: 38400,

Data bits : 8,

Parity Bit: None,

Stop Bit: 1,

Direct to comm. flow: None or xon/xoff

Steps to Follow
Pin-out Information:
DB-9 Female          Line Name                    RJ45
            1                  Carrier Detect               No Conn
            2                  Receive Data                4
            3                  Transmit Data               6
            4                  Data Term Ready          3 & 8
            5                  Signal Ground               5
            6                  Data Set Ready             2
            7                  Request to Send            7
            8                  Clear to Send                1
            9                  Ring Indicate                No Conn



L020, L040, L080, L700, L180, What is the pinout for cable to connect to CSE port?, Null modem cable, Pinout, Cable connector, CLI port, CSE port, RJ45, SL500, CSE cable, DB9, DB-9, RJ-45, Diagnostic cable
Previously Published As  STKKB62549



Attachments

This solution has no attachment