Sun System Handbook - ISO 3.4 June 2011 Internal/Partner Edition | |||
|
|
Solution Type Technical Instruction Sure Solution 1012485.1 : Resetting Sun Blade [TM] 2500 (silver) Power Supply
PreviouslyPublishedAs 217202 Description How to reset Power Supply after an extended power failure Steps to Follow Under normal operating conditions, when power to the PSU (Power Supply Unit) is briefly interrupted, and then restored, the workstation will automatically power-on (and the Power button will not need to be depressed). However, if the power failure or interruption is lengthy, your workstation may fail to automatically power-on. If this is the case, follow this procedure: 1. Disconnect the workstation powercord from the AC outlet for approximately one minute. 2. Reconnect the powercord. In a few seconds, your workstation should automatically power on. Product Sun Blade 2500 Workstation SB2500, Silver, Power failure. Power Supply, PSU Previously Published As 83645 Change History Date: 2006-01-30 User Name: 31620 Action: Approved Comment: Verified Metadata - ok Verified Keywords - ok Verified still correct for audience - currently set to contract Audience left at contract as per FvF http://kmo.central/howto/FvF.html Checked review date - currently set to 2007-01-25 Checked for TM - changed title from SB2500 to Sun Blade [TM] 2500 Publishing under the current publication rules of 18 Apr 2005: Version: 3 Date: 2006-01-25 User Name: 31620 Action: Accept Comment: Version: 0 Date: 2006-01-25 User Name: 29970 Action: Approved Comment: Good doc. Version: 0 Date: 2006-01-25 User Name: 28241 Action: Approved Comment: Tom Mortion please Tech Review.Please see Product Notes for SB2500 silver. Thanks Version: 0 Date: 2006-01-25 User Name: 28241 Action: Created Comment: Version: 0 Product_uuid 5d658be6-11f4-11d7-976d-c7b5989377a7|Sun Blade 2500 Workstation Attachments This solution has no attachment |
||||||||||||
|