Sun StorageTek[TM] 6540 Firmware Matrix

Asset ID:	1-71-1009934.1
Update Date:	2011-05-23
Keywords:

Solution Type Technical Instruction Sure

Solution 1009934.1 : Sun StorageTek[TM] 6540 Firmware Matrix

Applies to:

Sun Storage 6540 Array
Sun Storage Common Array Manager (CAM) - Version: 5.0 and later [Release: 5.0 and later]
All Platforms

Goal

To discuss this information further with Oracle experts and industry peers, we encourage you to review, join or start a discussion in the My Oracle Support Community, Storage Disk 6000 and 2000 Series RAID Arrays Community.

This article documents Sun StorageTek 6540 Array's components firmware baseline bundled in each corresponding CAM release and patched versions.

This document assumes the relevant array product is managed with Common Array Manager. This reference can be used by end-user and all levels of support personnel for purpose of verifying component firmware and management software compatibility.

For instructions to download CAM, please refer to <Document 1296274.1> How to Download Common Array Manager (CAM) Software and Patches.

Solution

Baseline / CAM Release	Sun StorageTek 6540 Firmware
	Patch	Controller		Expansion
		Firmware	NVSRAM	CSM100 FC	CSM100 SATA	CSM200	FLA200 FC	FLA300 FC	FLC200 dSATA	FLC200 iSATA
1.0	no support
1.1
1.2
1.3
2.0
2.1
Naming convention changed. Version following 2.1 is 5.0. There was no 3.x or 4.x.				no support			no support
5.0	121540-02	06.16.81.10	N6091-616843-005			9865
5.0.1	121540-02	06.16.81.10	N6091-616843-005			9865
5.0.2	121540-02	06.16.81.10	N6091-616843-005			9865
5.0.2	124946-01 118185-26					9867^a
5.1.0.10	121540-04	06.19.23.10^b	N6091-619843-002^b	9643	9726	9884
5.1.0.11	121540-04	06.19.25.10	N6091-619843-002	9643	9726	9884
5.1.2.2	121540-04	06.19.25.10	N6091-619843-002	9643	9726	9884
5.1.3.2	121540-04	06.19.25.10	N6091-619843-002	9643	9726	9884
5.1.3.2	controlled	06.19.25.13^d
5.1.3.2	controlled	06.19.25.14^d
6.0.0.10	n/a	06.19.25.16	N6091-619843-002	9643	9726	9887	9330	9643	9565	9726
6.0.1.11	n/a	06.19.25.16	N6091-619843-002	9643	9726	9887	9330	9643	9565	9726
6.1.0.16	n/a	06.60.11.10	N6091-660843-003	9643	9726	98B4	9330	9643	9565	9726
		07.10.25.10^f	N6091-710843-005^f	9673	9728				9566	9728
6.1.0.16	137934-02 137935-02 137936-02
		07.10.25.10	N6091-710843-005
6.1.1.10	n/a	06.60.11.10	N6091-660843-003	9643	9726	98B4	9330	9643	9565	9726
		07.10.25.10^f	N6091-710843-005^f	9673	9728				9566	9728
6.1.1.10	139034-01 139035-01 139036-01
		07.10.25.10	N6091-710843-005
6.1.2.8	n/a	06.60.11.10	N6091-660843-003	9643	9726	98B4	9330	9643	9565	9726
		07.10.25.10^h	N6091-710843-005^h	9673	9728				9566	9728
6.2.0.13		06.60.11.10	N6091-660843-003	9681	9728	98C1	9330	9681	9566	9728
		07.15.11.11ⁱ	N6091-710843-005
6.2.0.14	140060-01 140061-01 140062-01
		07.15.11.12^j
6.2.0.14	140060-02 140061-02 140062-02
		07.15.11.12^j
6.3.0		(CAM 6.3 was never released.)
6.4.0.10		06.60.11.10	N6091-660843-003	9681	9728	98C4	9330	9681	9566	9728
		07.50.08.10	N6091-750843-003
6.4.1.5		06.60.22.10	N6091-660843-003	9682	9728	98C4	9330	9682	9566	9728
		07.50.13.10	N6091-750843-003
6.5.0.10		06.60.22.10	N6091-660843-003	9682	9728	98C4	9330	9682	9566	9728
		07.60.18.10	N6091-760843-003
6.5.0.x	controlled	(06.60.22.10)	N6091-660843-039^k
		(07.1x.xx.xx) (07.50.xx.xx) (07.60.18.10)	N6091-710843-059^k N6091-750843-039^k N6091-760843-039^k
6.6.0.11^l		06.60.22.10	N6091-660843-003	9682	9728	98D0	9330	9682	9566	9728
		07.60.18.13	N6091-760843-004
6.6.0.12^l	141474-01^l 141475-01 141476-01	(CR6935284 CAM BUI host types do not match array hostregion.)
6.6.0.12	143759-01 143760-01 143761-01
		07.60.36.10
6.7.0.12		06.60.22.10	N6091-660843-003	9682	9728	98D3	9330	9682	9566	9728
		07.60.36.13	N6091-760843-004
6.7.0.13 (Windows Only)	144861-01	(CAM core patch for Windows only. Fixes CR6968739 J4410 reporting incorrect chassis serial number; and CR6972298 Win2008 undefined constant.)
6.7.0.x	145965-02 145966-02 145967-02			(Seagate drives firmware fixes for 6000/2500/J4000; 6000/2500 controller firmware fixes. Includes all previous fixes in 14596[567]-*.)
		07.60.53.10
6.7.0.x	145965-03 145966-03 145967-03			(For F5100 FMOD firmware fixes FMODs zombie during db restore operation. Includes all previous fixes in 14596[567]-*.)
		07.60.53.10
Baseline / CAM Release	Patch	Firmware	NVSRAM	CSM100 FC	CSM100 SATA	CSM200	FLA200 FC	FLA300 FC	FLC200 dSATA	FLC200 iSATA
		Controller		Expansion
	Sun StorageTek 6540 Firmware

NOTE: Firmware shown as "controlled" are not publicly available and is only provided on a case-by-case basis as deemed necessary by support services.

^a Temporary fix for Sun Alert 102757 - 6140/6540 Exp Tray Firmware (IOM 9865) May Cause Loss of Access to Mulitple Disks. Permanent fix in baseline 5.1 with IOM 9884.
^b Some interim build before 06.19.23.10 may have been released to some customers as temporary fix, these should be updated to 5.1 baseline or later ASAP.
^c Sun StorEdge 5000 NAS Gateway bug fix.
^d 06.19.25.13/23 and 06.19.25.14/.24 were early access releases of .16/26. Customers with this firmware should be updated to .16/26. Note that .14 contains all fixes in .13 and supersedes it.
^e (deleted)
^f 7.10 firmware is an optional upgrade and is not bundled in CAM 6.1.0 and 6.1.1. (Refer to sun.com/download for Sun StorageTek 6000 Series Array Firmware Upgrade Utility.)
^g (deleted)
^h 7.10.25.10 firmware is now bundled in CAM 6.1.2 but is still an optional upgrade. Separate utility still needed to upgrade from 06.x to 07.10.25.10. (Refer to sun.com/download for Sun StorageTek 6000 Series Array Firmware Upgrade Utility.)
ⁱ 7.15.11.11 firmware is bundled with CAM 6.2.0.13. Separate utility still needed to upgrade from 06.x to 07.10, then from 07.10 to 07.15 by CAM. (Refer to sun.com/download for Sun StorageTek 6000 Series Array Firmware Upgrade Utility.)
^j Fixes CR6757957 "Auto Code Sync feature failed during controller replacement ... (6140, 6540, FLX380)"
^k Temporary fix in NVSRAM for CR6704575 PFA issue.
^l CAM 6.6.0.11 host types do not match array's host region (CR6935284), affecting 2500, 6140, 6180, 6540, 6580/6780. This may result in either new mappings selecting the wrong host region, or user confused by the display and change existing mappings which was correct, to become wrong. CAM 6.6.0.12 through patch 14147[456]-01 was specifically released to resolve this bug.

Internal website for CAM supported array firmware matrix.
http://tsc-storage.us.oracle.com/products/CAM/matrix.html
This site is typically updated first before being edited for public consumption.

Attachments

This solution has no attachment