How to replace the DVD / USB Module in a Sun SPARC Enterprise(R) T5120/5220 Server [Video]

Asset ID:	1-71-1007051.1
Update Date:	2010-10-12
Keywords:

Solution Type Technical Instruction Sure

Solution 1007051.1 : How to replace the DVD / USB Module in a Sun SPARC Enterprise(R) T5120/5220 Server [Video]

Applies to:

Sun SPARC Enterprise T5120 Server
Sun SPARC Enterprise T5220 Server
All Platforms

Goal

Description

How do I replace the DVD / USB Module in a Sun SPARC Enterprise(R) T5120/5220 Server ?

This document explains how to physically replace and install a DVD / USB Module in a T5120/5220 Server . It does not explain how to diagnose a faulty DVD / USB Module.

Available for this topic, a Video Tutorial; Brief how-to video tutorials that provide step-by-step instructions answering Sun's most frequently asked questions. View the video answer and/or follow the detailed instructions below.

Video - T5120/5220 DVD/USB Replacement (5:00)

Sunsolve users must download the attachment to view the video.

Solution

Steps to Follow

Power down the host system (using the front panel power button) or STOP or poweroff command from the SP's root/ ILOM or SP's admin/ALOM command line interfaces, respectively.
Unplug the system's power cord(s)

Remove the system's top cover.

Implement all the usual anti-static-discharge methods...

Prepare an antistatic surface to set parts on during the removal, installation, or replacement process.

Place ESD-sensitive components such as the printed circuit boards on an antistatic mat. The following items can be used as an antistatic mat:

Antistatic bag used to wrap a Sun replacement part
Sun ESD mat, part number 250-1088
A disposable ESD mat (shipped with some replacement parts or optional system components)

When servicing or removing server components, attach an antistatic strap to your wrist and then to a metal area on the chassis.

REMOVING THE DVD / USB MODULE

Remove the following hard drives:

Each is the Hard Disk farthest to the right as you look at the front of the system.

T5120server: HDD3

T5220server: HDD7

Release the DVD/USB module from the hard drive backplane.

Use the finger indent in the hard drive bay below the DVD/USB module to extend the release tab

Slide the DVD/USB module out of the hard drive cage.

NOTE: Some of the initial T5120/5220's did not have the release tab. Simply put your finger in the indent in the hard drive bay below the DVD/USB module, pull hard forward on the DVD/USB Module to remove it from the system.

A few sharp pulls may be necessary to disengage the DVD/USB module from the Hard Disk Backplane. Have you other hand in position to grasp the DVD/USB module should it release quickly from the Hard Disk Backplane. Place the DVD/USB Module on an antistatic mat or in an Antistatic bag.

INSTALLING THE DVD / USB MODULE

Slide the DVD/USB module into the front of the chassis until it seats.

If the system has a pull tab, slide the pull tab back into the system.

Install the hard drive you removed during the DVD/USB module removal procedure.

Replace the system's top cover. Plug in the system's power cord(s).

If the system administrator would like the Host powered-up, that can be done using the front panel power button or via a login to the SP's root or admin accounts and the appropriate START or poweron, respectively, may be used.

Product
Sun SPARC Enterprise T5220 Server
Sun SPARC Enterprise T5120 Server

Internal Comments
T5120, T5220, DVD, USB, VT
Previously Published As
91471

Change History
Date: 2009-11-19
User name: Dencho Kojucharov
Action: Updated
Comments: Currency check, audited by Dencho Kojucharov, Entry-Level SPARC Content Lead

Attachments

This solution has no attachment