Sun System Handbook - ISO 3.4 June 2011 Internal/Partner Edition | |||
|
|
Solution Type Technical Instruction Sure Solution 1006509.1 : Sun Fire[TM] 12K/15K/E20K/E25K servers: System Controller, Solaris[TM] OS installation, and Solaris[TM] Volume Manager (SVM) Configuration
PreviouslyPublishedAs 209107
Applies to:Sun Fire 12K ServerSun Fire 15K Server Sun Fire E20K Server Sun Fire E25K Server All Platforms GoalThe following procedure can be used to configure a Solaris[TM] installation and Solaris[TM] Volume Manager (SLVM) configuration on the System Controller when the System Controller (SC) disk must be completely rebuilt due to a failure.SolutionHow to configure Sun Fire[TM] 12K/15K/E20K/E25K servers:1. As part of the Solaris installation, partition the disk at c0t2d0 following the partition tables: Part Size Note: your previous installation of Solaris[TM] may have a two, four or four and a half gig swap space. All are supported, but new installations are recommended installing a four gig slice. 2. After the Solaris installation is complete, make sure the partition map on c0t3d0 is the same as c0t2d0. One method: Run format Or: Run this command as root: 3. Install the SDS/SVM packages. (Note that SVM is bundled with Solaris 9 and higher) 4. Add the following to the end of the /etc/lvm/md.tab file. mddb01 -c 3 c0t2d0s4 d20 -m d21 d30 -m d31 5. Initialize the meta-databases with: # metadb -a -f mddb01 6. Remove the swap device. # swap -d /dev/dsk/c0t2d0s1 7. Initialize the disk in the mirror and the mirror itself. # metainit d21 8. Add the new swap device and modify the /etc/vfstab file. # swap -a /dev/md/dsk/d20 /dev/md/dsk/d20 - - swap - no - vfstab entry 9. Unmount /export/install and initialize its disk and mirror. # umount /export/install 10. Change /export/install's entry in /etc/vfstab to: /dev/md/dsk/d30 /dev/md/rdsk/d30 /export/install ufs 2 yes logging 11. Perform a newfs on /export/install and mount it. # newfs -i 8192 -m 1 /dev/md/rdsk/d30 12. Prepare the disk and mirror for root. # metainit -f d11 13. REBOOT THE SYSTEM CONTROLLER. 14. Finally, synchronize the mirrors. # metainit d12 Product Sun Fire E25K Server Sun Fire E20K Server Sun Fire 12K Server Sun Fire 15K Server Internal Section Keywords: SC, rebuild, failure, SLVM, starcat, 15k, 25k Previously Published As 83103 Attachments This solution has no attachment |
||||||||||||
|