Asset ID:	1-71-1004607.1
Update Date:	2009-12-21
Keywords:

---

Solution Type  Technical Instruction Sure

Solution  1004607.1 :   Netra[TM] 20 server: Getting input/output to ttya  


PreviouslyPublishedAs
206390

Description
To redirect input/output to tty"a", you must be able to get to the lom prompt through the alarm card. At the lom prompt, the bootmode command can be used to set defaults, or go to the OK prompt, and set input and output device to ttya.

For more information on using the bootmode command, see InfoDoc 7047.



Steps to Follow
To go to the OK prompt from the lom prompt, type:
lom> console

ok> setenv input-device ttya

ok> setenv output-device ttya

If you pull the alarm card to try to force the output to ttya, the system will fail POST and power down.

To connect to the alarm card, use cable part number 530-1871 and adapter part number 530-2889.

Product
Netra 20 Server

redirect, ttya, alarm card
Previously Published As
47634

Change History
Date: 2005-08-12
User Name: 18392
Action: Approved
Comment: Added product noun, did some formatting.
Version: 3
Date: 2005-08-11
User Name: 18392
Action: Accept
Comment:
Version: 0
Date: 2005-08-11
User Name: 87288
Action: Approved
Comment: Document has been reviewed
Version: 0
Product_uuid
29aa2760-0a18-11d6-9ba6-ecdc03b9c8f5|Netra 20 Server

Attachments

This solution has no attachment