Sun Fire[TM] V20z and V40z server: SP and onboard NIC LEDs status information

Asset ID:	1-71-1003749.1
Update Date:	2009-11-18
Keywords:

Solution Type Technical Instruction Sure

Solution 1003749.1 : Sun Fire[TM] V20z and V40z server: SP and onboard NIC LEDs status information

Related Items


Sun Fire V20z Server
 Sun Fire V40z Server

Related Categories


GCS>Sun Microsystems>Servers>x64 Servers

PreviouslyPublishedAs
205282

Description
This document details the following SP and onboard network interface card(NIC) LED status information, for both the Sun Fire[TM] V20z and V40z servers:

Network Interface Ports:
Network Activity
Gigabit indication
100Mb indication
Link Status indication

Service Processor Management Ports:
FDX/Collision
Link Speed

Steps to Follow
Refer to the "Sun Fire Quick Reference" label glued to the underside of the top
chassis cover, for more details:

The "Motherboard Indicators, Switches, and Jumpers" section: shows the
approximate location of the LEDs.
The "Power Indicators" section: gives a short description of the LED status.

Gigabit 0 connector, bottom, viewed from rear	Description
Right	Traffic/Activity
Left	Gigabit indicator
LED indicators on Motherboard
D34	100Mbps indicator
D35	Link indicator

Gigabit 1 connector, top, viewed from rear	Description
Right	Traffic/Activity
Left	Gigabit indicator
LED indicators on Motherboard
D36	100Mbps indicator
D37	Link indicator

Traffic/Activity: On = traffic is occurring.
Gigabit indicator: On = Gigabit mode is active.
100Mbps indicator: On = 100 Megabit mode is active.
Link indicator: On = active link is established.

MGMT connector, Port 1 (top), viewed from rear	Description
Right	FDX/Collision
Left	Link Speed

MGMT connector, Port 2 (bottom), viewed from rear	Description
Right	FDX/Collision
Left	Link Speed

FDX/Collision Indicator LED:
On = Link operation in full-duplex mode
Blinking = Link operating in half-duplex mode with collisions detected
Off = Link inoperative or operating in half-duplex mode with no collisions dected

Link Speed Indicator LED:
On = Link operating at 100 Mbps
Off = Line inoperative or operating at 10 Mbps

Product
Sun Fire V20z Server
Sun Fire V40z Server

Internal Comments
Audited/updated 11/17/09 - [email protected], x64 Content Team

link status, 100Mb, 1Gb, network activity, LED, SP
Previously Published As
83146

Change History
Date: 2006-03-07
User Name: 25440
Action: Approved
Comment: Minor changes (MbpS -> Mbps throughout for consistency). Publishing.
Version: 6
Date: 2006-03-07
User Name: 25440
Action: Accept
Product_uuid
1acc55b3-4b82-11d8-99fc-080020a9ed93|Sun Fire V20z Server
4726b78d-56d2-11d8-9e3a-080020a9ed93|Sun Fire V40z Server

Attachments

This solution has no attachment