How to check if the platform is system powered on, Sun Fire[TM] X2100 Servers

Asset ID:	1-71-1002939.1
Update Date:	2011-02-04
Keywords:

Solution Type Technical Instruction Sure

Solution 1002939.1 : How to check if the platform is system powered on, Sun Fire[TM] X2100 Servers

Related Items


Sun Fire X2100 Server

Related Categories


GCS>Sun Microsystems>Servers>x64 Servers

PreviouslyPublishedAs
204042

Description
Description
Summary:

This document describes how to check if the is system is powered on via ipmitool and if you are local to the server.

Symptoms:

Status of power in question

Steps to Follow
Steps to Follow
Note: This document uses the optional service processor SMDC (Service Management Daughter Card) to get information of the system with the help of IPMI (Intelligent Platform Management Interface). Therefore this card needs to be installed and configured to follow the steps within this document.

To get information on how to install and configure the optional SMDC, please refer to Sun Fire X2100 Server User Guide, Part No. 819-3721, Appendix C "Using the Optional Service Processor"

Available at: http://www.oracle.com/technetwork/documentation/oracle-x86-servers-190077.html

1. Verify system power status is ON via ipmitool.

Run ipmitool from a remote system to SMDC (Service Management Daughter Card) Service Processor with the command shown in the example below. Check the first field "System Power" in the output. If the status is off, this means the system is not powered on.

      # ipmitool -I lanplus -U Admin -H <SMDC IP address> chassis status
System Power         : on
Power Overload       : false
Power Interlock      : inactive
Main Power Fault     : false
Power Control Fault  : false
Power Restore Policy : always-off
Last Power Event     :
Chassis Intrusion    : inactive
Front-Panel Lockout  : inactive
Drive Fault          : false
Cooling/Fan Fault    : false

If off and you expect it to be on, then refer to: <Document: 1011591.1> : How to check why the system is powered off, Sun Fire[TM] X2100 Servers..

2. Verifying system power if you are local to the server.

Verify that the Power LED from the front or rear is illuminated STEADY GREEN (ON) .
If not illuminated and you expect it to be ON, refer to: <Document: 1011591.1> : How to check why the system is powered off, Sun Fire[TM] X2100 Servers.

For further Information about LED states refer to Sun Fire X2100 Server Getting Started Guide, Part No. 819-3720, Chapter 1.6 "Powering On the Server"

Available at: http://www.oracle.com/technetwork/documentation/oracle-x86-servers-190077.html

Product
Sun Fire X2100 Server

Internal Comments
This document contains normalized content and is managed by the the Domain Lead(s) of the respective domains. To notify content owners of a knowledge gap contained in this
document, and/or prior to updating this document, please contact the domain engineers that are managing this document via the "Document Feedback" alias(es) listed below:

Normalization team alias: [email protected]

Domain Lead: [email protected]

x64, normalized, X2100, Power
Previously Published As
91577

Change History
Date: 2007-12-21
User Name: 31620
Action: Approved
Product_uuid
28c0502a-fd60-11d9-a8ca-080020a9ed93|Sun Fire X2100 Server

Attachments

This solution has no attachment