VSM - Channel Card Reporting FSC32C0 Parity Errors

Asset ID:	1-72-1320556.1
Update Date:	2011-05-18
Keywords:

Solution Type Problem Resolution Sure

Solution 1320556.1 : VSM - Channel Card Reporting FSC32C0 Parity Errors

Applies to:

Sun StorageTek VSM System - Version: 4 and later [Release: 4.0 and later ]
Sun StorageTek VSM System - Version: 4 to 5C [Release: 4.0 to 5.0]
Information in this document applies to any platform.

Symptoms

Customer reporting SIM messages with FSC32C0 embedded FSC 32C0 in the message.
Example:
.SLS6659I VTSS VTSS1 SIM:5090100000008FE0329080009E001A104200105C000032C00510420110068012
SLS6974I FAULT REPORTED BY VTSS:VTSS1 MODEL:VSMx SERIAL:xxxxxxxx FSC:32C0 FRU:xxx
Note Sense Bytes 22 & 23 are 32C0.

Cause

Defective channel card

#define FSC32C0_OM_ESCON_CIP_MEM_PAR_CHK 0x32C0

CSE: @SAME
ENG: An ICE CIP memory parity check 2 error was detected.
This error occurs when the CIP reads one of its memory
locations and bad parity is present on the data word.

Solution

Connect to VSM and acquire a set of base files.
Place files on zenobia
Run the crunch_it all.
Review the files and look for FSC 32C0 and identify card type, location, part number.
Create FS for local to replace defective channel card

Attachments

This solution has no attachment