Sun System Handbook - ISO 3.4 June 2011 Internal/Partner Edition | |||
|
|
Solution Type Problem Resolution Sure Solution 1017808.1 : send break does not always work on Sun Fire[TM] platform
PreviouslyPublishedAs 229038 Using:
Applies to:Sun Fire 6800 ServerSun Fire 3800 Server Sun Fire 4800 Server Sun Fire 4810 Server Sun Fire E6900 Server All Platforms SymptomsUsing:telnet> send break on the Sun Fire[TM] platform does not always work. CauseThere are a few reasons this may not work:Cause 1: We may not be telneting directly to the SC. Cause 2: Re-sizing a dtterm window sometimes breaks this "send break" functionality. Cause 3: When accessing the SC through a Terminal Server or different terminal software the break sequence may be different. SolutionSolution 1:When you telnet to another system first then from there to the SC (2 telnet sessions). The send break command stops at the first machine. ] To get around this you will have to perform the following steps from the telnet prompt:
telnet>
send esc telnet> send break NOTE: If you have more than 2 telnet sessions you will need to use send esc for each additional session that is open for this to work. Solution 2: Try one of the following:
Solution 3: In case you' re using different terminal software you may want to try some of the break sequences below:
Product Sun Fire 3800 Server Sun Fire 4800 Server Sun Fire 4810 Server Sun Fire 6800 Server Sun Fire E4900 Server Sun Fire E6900 Server telnet, SC, send, break, terminal, xterm, dtterm Previously Published As 45687 Change History Date: 2005-04-06 User Name: 7058 Action: Approved Comment: Product tagging was the only thing that changed as far as I can tell. Added missing key words. Updated review date. OK to republish. Version: 4 Date: 2005-04-04 User Name: 7058 Action: Accept Comment: Version: 0 Attachments This solution has no attachment |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|