SL500 - Door Open Button Fails to Operate After Park Command is Issued via CLI

Asset ID:	1-72-1015775.1
Update Date:	2011-04-14
Keywords:

Solution Type Problem Resolution Sure

Solution 1015775.1 : SL500 - Door Open Button Fails to Operate After Park Command is Issued via CLI

Applies to:

Sun StorageTek SL500 Modular Library System - Version: Not Applicable and later [Release: N/A and later ]
All Platforms
Checked for relevance on 7-Feb-2011.

Symptoms

Door open button fails to operate
CAP button fails to operate

Changes

{CHANGE}

Cause

{CAUSE}

Solution

Resolution
The intent of the "Park" command is to position the robot such that is can be removed. A reboot is required to recover once the command is issued.
It is not a requirement to recover from the command as the purpose is to remove/replace the robot, which requires a reboot anyway.

"Park" Command-

Parks the robot in the home position inside the robotics unit so the robot can be removed. You must reboot the library to return it to active status by either power cycling the library or opening and closing the front door.

Note: the robotics unit MUST initialize or it will be out of alignment by two array cells.

@ Robot, replacement, Reboot, require, return, active, service, SL500, Reference, Clarify, 3755694, detail, issue, Park, command, Library, not, ready, state
Previously Published As STKKB77441

Attachments

This solution has no attachment