Sun Microsystems, Inc.  Sun System Handbook - ISO 3.4 June 2011 Internal/Partner Edition
   Home | Current Systems | Former STK Products | EOL Systems | Components | General Info | Search | Feedback

Asset ID: 1-72-1011008.1
Update Date:2010-08-10
Keywords:

Solution Type  Problem Resolution Sure

Solution  1011008.1 :   StorADE returns 0 patches when upgrade from Unity 3.0.0.x to 3.0.1.x using migration CD  


Related Items
  • Sun Storage 6920 System
  •  
Related Categories
  • GCS>Sun Microsystems>Storage - Disk>Modular Disk - 6xxx Arrays
  •  

PreviouslyPublishedAs
215168


Symptoms
StorADE returns 0 patches when upgrade from Unity 3.0.0.x to 3.0.1.x using migration CD.

Resolution
The Cause:

CFE was using migration CD to perform upgrade from Unity 3.0.0.x to 3.0.1.x. The migration CD is only used for migrating from version 2.0.5 to 3.0.X. To upgrades from 3.0.0.x to 3.0.1.X, the 3.0.1 PatchCD should be used.

Patches need to be applied in four sessions. Regardless of what  you see.

First Session should apply the SP patches only.
The Second Session should apply DSP Firmware.
The Third Session should apply the Disk Firmware patches.
The Fourth Session should apply the Array Firmware.

Note: This is because the PatchPRO patch needs to be installed before the DSP patch will be recommeded and the Disk(s) Drive Fimware needs to be applied before the Arrays are updated to 3.2.2

Below are detail instructions for the upgrade of Sun StorEdge[TM] 6920 from version 3.0.0.X to 3.0.1.X using the Patch CD.

Instructions for Patch Upgrade from CD
  1. https://se6920_ip_addr:6789

  2. Login as user storage, password !storage.

  3. Click 'Sun Storage Automated Diagnostic Environment'

  4. Verify that 'Revision Analysis Source' is set to 'CD' by selecting: Administration -> General Setup -> Setup

  5. Save the Inventory by selecting: Inventory -> Actions Generate New Inventory -> Generate and Save. (This can take a few minute)

  6. Generate Upgrade report by Selecting: Inventory -> Actions -> Revision Maintenance:Upgrade -> Generate Upgrade Report (This may take as long as 10 minutes, wait for the job to complete)

  7. Select SP patches only and click on 'Apply Selected Upgrades'. Analysis -> Upgrade

  8. Click on the Jobs tab to view/monitor the running patch jobs, add the following note During Storade L10Npatch and EM patch installation, connection to the web console will be lost, but patchpro will continue the installation. . Please try logging back again https://se6920_ip_addr:6789 after EM and Storade patch installation. Do not kill any jobs or reboot the SP during this time.

  9. After the jobs complete, run another upgrade report by running Inventory -> Actions -> Revision Analysis -> Upgrade.

  10. Select Disk Drive patches if applicable
    *NOTE:*: For disk drive firmware to be recommended the Inventory.golden file must be edited or the disk drive firmware must be downgraded.

  11. After the jobs complete, run another upgrade report by running Inventory -> Actions -> Revision Analysis -> Upgrade.

  12. Select DSP patch and Array patch.
    *NOTE:*: The Array firmware changed with this release, patch will be recommended for all 6020 arrays.

  13. After the job completes, run another inventory report by running Inventory -> Actions -> Generate Inventory and select Save when done.

  14. After the jobs complete, run another upgrade report by running Inventory -> Actions -> Revision Analysis -> Upgrade.

  15. There should be no patches recommended at this point.


Additional Information
Article ID:
Patch ID:
FIN/FCO/ECO:
Customer URL:
Internal URL:
OS: Solaris/SunOS
OS Version: 8
Platform: Generic
Architecture: Sun Fire 880
Product Name: 69XX (Unity3)
Product Version: FW
Tech Area: Network Storage HW
Comments:

Product
Sun StorageTek 6920 System

Internal Comments
Service Request ID: 64907710
Escalation ID: 1-15073106
Solution ID: 1-15517352
Owner GEO: APAC
Customer GEO: AMER

SE6920, Unity, Upgrade, Patch CD, 3.0.0, 3.0.1, StorADE
Previously Published As
84669

Change History
Date: 2006-04-10
User Name: 97961
Action: Approved
Comment: - Audience changed to "Contract" per FvF http://kmo.central/howto/FvF.html
- Applied trademarking
Version: 3
Date: 2006-04-10
User Name: 97961
Action: Accept
Comment:
Version: 0
Date: 2006-04-10
User Name: 146649
Action: Approved
Comment: Tech reviewed.

Added "migration CD" info into the title and the problem description.
Corrected some typos.

Sending this document to the final reviewer stage.
- Hiro
Version: 0
Date: 2006-03-24
User Name: 146649
Action: Accept
Comment:
Version: 0




Product_uuid
67794720-356d-11d7-8ef2-ce2ac2bc9136|Sun StorageTek 6920 System

Attachments
This solution has no attachment
  Copyright © 2011 Sun Microsystems, Inc.  All rights reserved.
 Feedback