Asset ID:	1-72-1009706.1
Update Date:	2009-11-17
Keywords:

---

Solution Type  Problem Resolution Sure

Solution  1009706.1 :   How to clear BMC error  


PreviouslyPublishedAs
213347

Symptoms
If you see the following error on system console of a Sun Fire[TM] V20z/V40z then you need to clear the Error Log.

ERROR
02A2: BMC System Error Log (SEL) Full.

Resolution
If the above message appears during POST, perform the following steps to run BIOS setup and delete the System Event Log:

1. Boot the server and press the F10 key when prompted to run BIOS Setup.
2. Select the "Advanced" menu.
3. Scroll down to "IPMI" and press the ENTER key.
4. Scroll down to the System Event Log and press the ENTER key.
(To verify the existing Event Logs)
5. At the "Clear System Event Log" selection, press the ENTER key to toggle between "Enable" and "Disable."
6. Select "Enable."
7. Press the F10 key to Save the changes and exit the BIOS Setup.
A future System ROM upgrade will allow the server to continue POST without user input if the System Event Log becomes full. This advisory will be updated when additional information becomes available.

Product
Sun Fire V40z Server
Sun Fire V20z Server

Internal Comments
Audited/updated 11/17/09 - [email protected], x64 Content Team

BMC, v20z, v40z, console, BIOS
Previously Published As
88448

Change History
Date: 2007-04-13
User Name: 71396
Action: Approved
Comment: Publishing
Version: 3
Date: 2007-04-13
User Name: 71396
Action: Accept
Comment:
Version: 0
Date: 2007-04-13
User Name: 35516
Action: Approved
Comment: Technical correct and easy to understand please publish
Version: 0

Attachments

This solution has no attachment