Sun System Handbook - ISO 3.4 June 2011 Internal/Partner Edition | |||
|
|
Solution Type Problem Resolution Sure Solution 1009229.1 : Offlined A5x00 disks return to online state after LIP
PreviouslyPublishedAs 212769 Symptoms A disk or disks that have been placed in an offline state via the luxadm -e offline <path> command are returned to an online state following a luxadm remove of a different disk. Resolution The luxadm remove command forces the link to reinitialize, using the Loop Initialization Primitive (LIP) sequence. This LIP process causes all devices to participate in loop initialization. Previously off-lined A5x00 disks will come online. Other commands and actions that can cause similar behavior are the luxadm -e forcelip, luxadm insert,a host reboot or any physical change in the loop. See the following example which illustrates this behavior. hostA# luxadm display MINE SENA DISK STATUS SLOT FRONT DISKS (Node WWN) REAR DISKS (Node WWN) 0 On (O.K.) 200000203704faa8 On (Loop not accessible) 1 On (O.K.) 20000020370709ec On (Loop not accessible) 2 On (O.K.) 20000020370707fa On (Loop not accessible) 3 On (O.K.) 20000020371636bd On (Loop not accessible) 4 On (O.K.) 20000020370d6676 Not Installed 5 On (O.K.) 2000002037145a35 On (Loop not accessible) 6 On (O.K.) 2000002037070913 On (Loop not accessible) SUBSYSTEM STATUS FW Revision:1.09 Box ID:2 Node WWN:5080020000000550 Enclosure Name:MINE Power Supplies (0,2 in front, 1 in rear) 0 O.K.(rev.-02) 1 O.K.(rev.-02) 2 O.K.(rev.-02) Fans (0 in front, 1 in rear) 0 O.K.(rev.-05) 1 O.K.(rev.-00) ESI Interface board(IB) (A top, B bottom) A: O.K.(rev.-04) GBIC module (1 on left, 0 on right in IB) 0 Failed(mod.-05): Not receiving a signal 1 Not Installed B: O.K.(rev.-04) GBIC module (1 on left, 0 on right in IB) 0 O.K.(mod.-05) 1 Not Installed Disk backplane (0 in front, 1 in rear) Front Backplane: O.K.(rev.-05) Temperature sensors (on front backplane) 0:42?C 1:42?C 2:40?C 3:39?C 4:40?C 5:40?C 6:43?C (All temperatures are NORMAL.) Rear Backplane: O.K.(rev.-05) Temperature sensors (on rear backplane) 0:40?C 1:42?C 2:40?C 3:39?C 4:39?C 5:39?C 6:42?C (All temperatures are NORMAL.) Interconnect assembly O.K.(rev.-03) Loop configuration Loop A is configured as two separate loops. Loop B is configured as two separate loops. Language USA English hostA# luxadm -e offline /dev/rdsk/c3t66d0s2 hostA# luxadm display MINE SENA DISK STATUS SLOT FRONT DISKS (Node WWN) REAR DISKS (Node WWN) 0 On (O.K.) 200000203704faa8 On (Loop not accessible) 1 On (O.K.) 20000020370709ec On (Loop not accessible) 2 On (No path found)20000020370707fa On (Loop not accessible) 3 On (O.K.) 20000020371636bd On (Loop not accessible) 4 On (O.K.) 20000020370d6676 Not Installed 5 On (O.K.) 2000002037145a35 On (Loop not accessible) 6 On (O.K.) 2000002037070913 On (Loop not accessible) SUBSYSTEM STATUS FW Revision:1.09 Box ID:2 Node WWN:5080020000000550 Enclosure Name:MINE Power Supplies (0,2 in front, 1 in rear) 0 O.K.(rev.-02) 1 O.K.(rev.-02) 2 O.K.(rev.-02) Fans (0 in front, 1 in rear) 0 O.K.(rev.-05) 1 O.K.(rev.-00) ESI Interface board(IB) (A top, B bottom) A: O.K.(rev.-04) GBIC module (1 on left, 0 on right in IB) 0 Failed(mod.-05): Not receiving a signal 1 Not Installed B: O.K.(rev.-04) GBIC module (1 on left, 0 on right in IB) 0 O.K.(mod.-05) 1 Not Installed Disk backplane (0 in front, 1 in rear) Front Backplane: O.K.(rev.-05) Temperature sensors (on front backplane) 0:42?C 1:42?C 2:40?C 3:39?C 4:40?C 5:42?C 6:43?C (All temperatures are NORMAL.) Rear Backplane: O.K.(rev.-05) Temperature sensors (on rear backplane) 0:40?C 1:42?C 2:40?C 3:39?C 4:39?C 5:39?C 6:42?C (All temperatures are NORMAL.) Interconnect assembly O.K.(rev.-03) Loop configuration Loop A is configured as two separate loops. Loop B is configured as two separate loops. Language USA English hostA# luxadm -e forcelip hostA# luxadm display MINE SENA DISK STATUS SLOT FRONT DISKS (Node WWN) REAR DISKS (Node WWN) 0 On (O.K.) 200000203704faa8 On (Loop not accessible) 1 On (O.K.) 20000020370709ec On (Loop not accessible) 2 On (O.K.) 20000020370707fa On (Loop not accessible) 3 On (O.K.) 20000020371636bd On (Loop not accessible) 4 On (O.K.) 20000020370d6676 Not Installed 5 On (O.K.) 2000002037145a35 On (Loop not accessible) 6 On (O.K.) 2000002037070913 On (Loop not accessible) SUBSYSTEM STATUS FW Revision:1.09 Box ID:2 Node WWN:5080020000000550 Enclosure Name:MINE Power Supplies (0,2 in front, 1 in rear) 0 O.K.(rev.-02) 1 O.K.(rev.-02) 2 O.K.(rev.-02) Fans (0 in front, 1 in rear) 0 O.K.(rev.-05) 1 O.K.(rev.-00) ESI Interface board(IB) (A top, B bottom) A: O.K.(rev.-04) GBIC module (1 on left, 0 on right in IB) 0 Failed(mod.-05): Not receiving a signal 1 Not Installed B: O.K.(rev.-04) GBIC module (1 on left, 0 on right in IB) 0 O.K.(mod.-05) 1 Not Installed Disk backplane (0 in front, 1 in rear) Front Backplane: O.K.(rev.-05) Temperature sensors (on front backplane) 0:42?C 1:42?C 2:40?C 3:39?C 4:40?C 5:40?C 6:43?C (All temperatures are NORMAL.) Rear Backplane: O.K.(rev.-05) Temperature sensors (on rear backplane) 0:40?C 1:42?C 2:40?C 3:39?C 4:39?C 5:39?C 6:42?C (All temperatures are NORMAL.) Interconnect assembly O.K.(rev.-03) Loop configuration Loop A is configured as two separate loops. Loop B is configured as two separate loops. Language USA English Product Sun StorageTek A5200 Array Sun StorageTek A5100 Array Sun StorageTek A5000 Array luxadm, a5x00, photon Previously Published As 80219 Change History Date: 2005-02-14 User Name: 31620 Action: Approved Comment: Verified Metadata Verified still correct for audience - free Checked review date 2006-02-03 Checked for TM - none needed Publishing Version: 3 Date: 2005-02-11 User Name: 31620 Action: Accept Comment: Version: 0 Product_uuid 2a8acc34-0a18-11d6-87ef-bd9528a0b933|Sun StorageTek A5200 Array 2a875298-0a18-11d6-8960-b3c71159a860|Sun StorageTek A5100 Array 2a83ce34-0a18-11d6-8498-8ec5d44f476b|Sun StorageTek A5000 Array Attachments This solution has no attachment |
||||||||||||
|