Sun System Handbook - ISO 3.4 June 2011 Internal/Partner Edition | |||
|
|
Solution Type Problem Resolution Sure Solution 1008995.1 : How to recover a domain on Sun Fire[TM] 3800/4800/4810/4900/6800/6900 Midrange Server that is found in Standby mode.
PreviouslyPublishedAs 212411 Symptoms A domain on a Sun Fire[TM] 3800/4800/4810/4900/6800/6900 Midrange Server is found in Standby mode. Resolution If the domain was active prior to being in a Standby mode without user intervention, then a setkey off followed by a setkey on sequence will properly recover the domain. This will ensure that the domain resources will be in a known state. With the following data it may be possible to determine if this event occurred due to a power failure or environmental issue: - domain loghost data - domain console output - domain showlogs output - platform loghost data - platform console output - platform showlogs output Additional Information See the following documentation on setkey and Standby mode: Sun Fire[TM] Midrange System Controller Command Reference Manual Sun Fire[TM] Midrange Systems Platform Administration Manual Part Numbers will vary depending on Firmware levels. Product Sun Fire 6800 Server Sun Fire 4810 Server Sun Fire 4800 Server Sun Fire 3800 Server Sun Fire E4900 Server Sun Fire E6900 Server found, Standby, domain, recover Previously Published As 71386 Change History Date: 2006-03-07 User Name: 71396 Action: Approved Comment: Publishing. Version: 3 Date: 2006-03-07 User Name: 71396 Action: Accept Comment: Version: 0 Date: 2006-03-07 User Name: 77482 Action: Approved Comment: Made couple minor changes. Doc is ready to be Published Version: 0 Date: 2006-03-03 User Name: 114416 Action: Approved Comment: clarified the setkey sequence and added Amazon to doc Version: 0 Attachments This solution has no attachment |
||||||||||||
|