Entering a date in the past in schd.conf causes continous battery refreshes

Asset ID:	1-72-1004590.1
Update Date:	2010-08-26
Keywords:

Solution Type Problem Resolution Sure

Solution 1004590.1 : Entering a date in the past in schd.conf causes continous battery refreshes

Related Items


Sun Storage T3 Array

Related Categories


GCS>Sun Microsystems>Storage - Disk>Modular Disk - Other

PreviouslyPublishedAs
206369

Symptoms

If you inadvertently put a schd.conf on a T3 with date in the past, you could cause it to do continous battery

refreshes.

Using this for /etc/schd.conf:
BAT_BEG 05-03-2001,09-30-00
BAT_CYC 28

This was a year off (the actual year was 2002).   The battery continued refreshing ,
adding 28 days to every cycle. It keeps doing this until it catches up to the
currect date.

You will notice the following entries in /syslog

May 05 02:54:33 sh09[2]: N: refresh -s
May 05 02:56:29 sh09[2]: N: cd etc
May 05 02:56:32 sh09[2]: N: cat schd.conf
May 05 02:56:35 sh09[2]: N: cd ..
May 05 02:56:40 sh09[2]: N: refresh -i
May 05 02:56:47 BATD[2]: N: Battery Refreshing cycle starts from this point.
May 05 02:56:50 LPCT[2]: N: u1pcu1: Refreshing battery
May 05 02:57:22 sh09[2]: N: refresh -s
May 05 03:02:48 BATD[2]: N: u1pcu1: battery passed health check.
May 05 03:27:20 sh09[2]: N: refresh -s
May 05 03:34:13 sh09[2]: N: refresh -s
May 05 03:35:24 sh09[2]: N: refresh -s
May 05 14:15:05 LPCT[2]: N: u1pcu2: Refreshing battery
May 05 14:21:04 BATD[2]: N: u1pcu2: battery passed health check.
May 06 01:46:48 BATD[2]: N: Battery Refreshing cycle ends at this point.
May 06 01:46:56 BATD[2]: N: Battery Refreshing cycle starts from this point.
May 06 01:46:59 LPCT[2]: N: u1pcu1: Refreshing battery
May 06 01:52:57 BATD[2]: N: u1pcu1: battery passed health check.
May 06 03:29:03 sh11[2]: N: refresh -s
May 06 13:05:17 LPCT[2]: N: u1pcu2: Refreshing battery
May 06 13:11:15 BATD[2]: N: u1pcu2: battery passed health check.
May 07 00:37:15 BATD[2]: N: Battery Refreshing cycle ends at this point.
May 07 00:37:25 BATD[2]: N: Battery Refreshing cycle starts from this point.

Resolution

How to Fix:

On the affected T3 , issue a refresh -k . This will stop Battery Refreshing.
Create a /tmp/schd.conf on a system somewhere. (Using correct dates)

BAT_BEG MM-DD-YYYY,HH-MM-SS

BAT_BEG 28

Ftp this /tmp/schd.conf back to the T3 /etc/schd.conf
refresh -s , wait for all batteries to go status Normal .
Type refresh -i , to get the correct date to be used.
Type refresh -s , to check that the correct date is now set.

No battery refreshing Task is currently running. PCU1 PCU2 --------------------------------------------------------------
U1 Normal Normal
U2 Normal Normal
Current Time Sun Jul 14 08:32:12 2002
Next Refresh Tue Sep 03 09:30:00 2002

Product
Sun StorageTek T3 Array

Internal Comments

Internal Section

This was tested on 1.18,1.17b, 1.16

Bug Filed is 4683597.

David Bestor <[email protected]>

Previously Published As
45700

Change History
Date: 2003-05-20
User Name: Administrator
Action: Migration from KMSCreator
Comment: updated by : John Howard
comment : updating SRDB based on conversation with field .... asked to make it more precise
date : Sep 24, 2002

updated by : John Howard
comment : updating SRDB based on conversation with field .... asked to make it more precise
date : Sep 24, 2002

updated by : Dean Clausen
comment : Issued
date : Aug 14, 2002

updated by : John Rafferty
comment : No comment
date : Aug 12, 2002

updated by : David Bestor
comment : submit
date : Jul 14, 2002

updated by : David Bestor
comment : Article created.
date : Jul 9, 2002
Version: 0
Product_uuid
2a6d7d50-0a18-11d6-8e0b-f0bd33b24928|Sun StorageTek T3 Array

Attachments

This solution has no attachment