Sun System Handbook - ISO 3.4 June 2011 Internal/Partner Edition | |||
|
|
Solution Type FAB (standard) Sure Solution 1275610.1 : Temporary deviation to allow Service to use Uniboards with plastics that may show signs of slight damage but are fully functional and should not be returned as defective.
In this Document
Oracle Confidential (PARTNER). Do not distribute to customers
Applies to:Sun Netra 1290 Server - Version: Not Applicable to Not Applicable - Release: N/A to N/ASun Fire E2900 Server - Version: Not Applicable to Not Applicable [Release: N/A to N/A] Sun Netra 1280 Server - Version: Not Applicable to Not Applicable [Release: N/A to N/A] Sun Fire V1280 Server - Version: Not Applicable to Not Applicable [Release: N/A to N/A] Information in this document applies to any platform. __________ Affected Parts: 540-4979 - 900MHz CPU/Memory Uniboard UltraSPARC III Cu 540-5849 - 1200MHz CPU/Memory Uniboard UltraSPARC III Cu 540-6038 - 1200MHz CPU/Memory Uniboard UltraSPARC IV 540-6077 - 1050MHz CPU/Memory Uniboard UltraSPARC IV 540-6085 - 900MHz CPU/Memory Uniboard UltraSPARC III Cu 540-6232 - 1050MHz CPU/Memory Uniboard UltraSPARC IV 540-6257 - 1200MHz CPU/Memory Uniboard UltraSPARC IV 540-6298 - 1350MHz CPU/Memory Uniboard UltraSPARC IV 540-6348 - 1200MHz CPU/Memory Uniboard UltraSPARC III Cu 540-6442 - 1500MHz CPU/Memory Uniboard UltraSPARC IV+ 540-6664 - 1350MHz CPU/Memory Uniboard UltraSPARC IV 540-6680 - 1500MHz CPU/Memory Uniboard UltraSPARC IV+ 540-6757 - 1800MHz CPU/Memory Uniboard UltraSPARC IV+ 540-6864 - 1050MHz CPU/Memory Uniboard UltraSPARC IV 540-6880 - 1200MHz CPU/Memory Uniboard UltraSPARC IV 540-7048 - 1500MHz CPU/Memory Uniboard 540-7126 - 1950MHz CPU/Memory Uniboard UltraSPARC IV+ 540-7240 - 1350MHz CPU/Memory Uniboard UltraSPARC IV 540-7242 - 1050MHz CPU/Memory Uniboard UltraSPARC IV 540-7243 - 1200MHz CPU/Memory Uniboard UltraSPARC IV 540-7531 - 1800MHz CPU/Memory Uniboard UltraSPARC IV+ 559-0070 - 1200MHz CPU/Memory Uniboard UltraSPARC III Cu 559-0071 - 900MHz CPU/Memory Uniboard UltraSPARC III Cu SymptomsThe above listed parts will function normally and this issue will have no impact on system operation.Impact Due to critical component shortages you may receive any of the above listed boards with slightly damaged plastic components. This does not in any way interfere with normal operation. For example, some boards may arrive with a tooth missing from the teeth rail. See attachments for examples of potential damaged plastic components. ChangesContributing FactorsComponent shortages on our supplier side for plastics used on the above listed uniboards has contributed to this situation. CauseRoot CauseCritical component shortage on our supplier side impacts our ability to replace boards with minor flaws to some plastic parts. We are currently restarting production of these components and should have a new supplier set up and qualified by the end of the first quarter of 2011. There will be no future purge of the RSLs to address these issues. SolutionWorkaroundSee Resolution section below. Resolution Use boards as normal, and do not send them back as defective for the above stated issues. Identification of Affected Parts (how to) See attached pictures that show examples of these issues. For information about FAB documents, its release processes, implementation strategies and billing information, go to the following URL: * http://tns.central/fab In addition to the above you may email: * [email protected] Contacts Contributor: [email protected] Responsible Engineer: [email protected] Responsible Manager: [email protected] Business Unit Group: Systems Group-Netra Systems and Networking, Systems Group-SVS Attachments This solution has no attachment |
||||||||||||
|