Sun System Handbook - ISO 3.4 June 2011 Internal/Partner Edition | |||
|
|
Solution Type FAB (standard) Sure Solution 1000061.1 : Minimum supported releases for the Sun StorageTek T3+, 6120, 6320 and 6920.
PreviouslyPublishedAs 200077 Product Sun StorageTek T3+ Array Sun StorageTek 6120 Array Sun StorageTek 6320 System Sun StorageTek 6920 System Bug Id <SUNBUG: 6455175>, <SUNBUG: 6366175>, <SUNBUG: 6359654>, <SUNBUG: 6276050>, <SUNBUG: 6344256>, <SUNBUG: 5107602>, <SUNBUG: 6521338> Impact If a system is under the "Minimum Supported release": * The Services organization will provide break fix support and will work to ensure recovery from all issues that occur. If Services is unable to properly recover a system, we will engage PDE for assistance. But ONLY for recovery purposes. * Services and PDE will provide full support for all upgrade events. * PDE will not be engaged to perform RCA. PTS will provide a Best Effort RCA. * Neither Service nor PDE will write and submit bugs against releases below the Minimum Supported release. The Minimum Support Releases are: T3B: 3.2.2 6120: 3.2.2 Array firmware 3.2.2 for the T3B and 6120 provides many specific bug fixes. However, the major improvements are: * Online disk firmware upgrades * New drive firmware for Seagate Spindle Motor Issues * Major enhancements to BEFIT * Improvements to the Scrubber 6320: 1.3 6320 MIRE release 1.3 is the first MIRE build that supports the 3.2.x stream. Therefore, same as T3B/6120 above. 6920 No Remote Replication: 3.0.1.22 The 6920 minimum release of 3.0.1.22 is driven by critical DSP fixes contained in 02.02.01.189 as well as Storade fixes. The array firmware is 3.2.5 which provides additional Back End Fault functionalities over the 3.2.2 release. These are necessary to accommodate DSP/Array interoperability issues. 6920 W/ Remote Replication: 3.0.1.26 3.0.1.26 provides a fix for Bug ID 6521338. Which has potential to result in the Secondary volume being corrupt. Therefore, customers running Remote Replication need to be at 3.0.1.26 6920 W/ External 6140 arrays: 3.0.1.26 3.0.1.26 provides support for externally attached CSM200s (6140 arrays). Therefore, customers who wish to use externally attached 6140s need to be running 3.0.1
Symptoms System running below the minimum supported revisions are subjected to reduced reliability and reduced diagnostic capabilities that could result in loss of access and/or longer time to recover.
Resolution Upgrade to at least the Minimum support revision. Preferably the latest revision. When upgrading from very old releases that are below the minimum support release, care must be taken to ensure all caveats and pre-requisites are accounted for. Typically, QA only tests and Release Notes are only written to account for 2 releases back. Comments The following InfoDocs should also be reviewed;
Related Information
Previously Published As 102928 Internal Contributor/submitter [email protected], [email protected] Internal Eng Business Unit Group KE Authors Internal Eng Responsible Engineer [email protected] Internal Services Knowledge Engineer [email protected] Internal Kasp FAB Legacy ID 102928 Internal Sun Alert & FAB Admin Info Critical Category: Significant Change Date: 2007-05-25 Avoidance: Firmware Responsible Manager: [email protected] Original Admin Info: WF - removed Closed Date as that is for SA doc release - 24-Sep-07 karen WF - initiated draft and sending to extended review. - Joe 5/22/07 WF - no feedback, sending to Publish. - Joe 5/25/07 Product_uuid 2a714b10-0a18-11d6-86e2-d56b387d4fbf|Sun StorageTek T3+ Array 2cd2e7d2-2980-11d7-9c3f-c506fe37b7ef|Sun StorageTek 6120 Array 4de60cc2-a08e-4610-b8bf-6a1881cb59c6|Sun StorageTek 6320 System 67794720-356d-11d7-8ef2-ce2ac2bc9136|Sun StorageTek 6920 System Attachments This solution has no attachment |
||||||||||||
|