SPARCstation 1 (Sun-4/60)
<=501-1382-12 |
501-1382-13 |
>=501-1382-14 |
4MB w/o FPU |
8MB w FPU |
8MB w FPU FCC-B |
<=501-1629-12 |
501-1629-13 |
>=501-1629-14 |
4MB w/o FPU |
8MB w FPU |
8MB w FPU FCC-B |
Power
- 8MB Board with 1MB SIMMs
- 2.5 Amps @ +5Vdc
- 12.5 Watts
Notes
- End of Support Life for the SPARCstation1 was 7/1/95.
- The minimum operating system is SunOS 4.0.3c.
- The minimum operating system for Boot PROM 2.4 is SunOS 4.1.1.
- Use 1MB SIMM 501-1408-01.
- Use 4MB SIMM 501-1625-01 or 501-1739-01.
- Bug 1047696 affects the installation of SunOS 4.1.1 and 4.1.1 Rev B. If 1MB
and 4MB SIMMs are mixed, install the 4MB SIMMs in Bank 0 when installing
miniunix.
- SIMM installation order is Bank 0, Bank 2, Bank 1, Bank 3.
- Use 2A Fuse 150-1174.
- CPU >=501-1382-08 or >=501-1629-10 is required for use with
Sun Common LISP, AutoCAD, Cobol, and SunOS 4.1.
- SPARC IU >=100-1808-02 is required for use with Sun Common LISP,
AutoCAD, Cobol, and SunOS 4.1.
- Power on systems with CPU boards 501-1382-10 or lower, or 501-1629-10,
before turning on external disk drive units.
- Install Load Board 501-1667 in systems without a disk drive and SBus cards.
Reference
- SPARCstation 1 Installation Guide, 800-4036.
|