| BYTE |
DESCRIPTION |
12
- |
-
13 |
Additional Sense Code (ASC)
Additional Sense Code Qualifier (ASCQ) |
| 00 |
00 |
No additional sense information |
| 00 |
01 |
Filemark detected |
| 00 |
02 |
End of partition/medium detected |
| 00 |
03 |
Setmark detected |
| 00 |
04 |
Begining-of-Partition/Medium detected |
| 00 |
05 |
End of data detected |
| 00 |
11 |
Audio play operation in progress |
| 00 |
12 |
Audio play operation paused |
| 00 |
13 |
Audio play operation successfully completed |
| 00 |
14 |
Audio play operation stopped due to error |
| 00 |
15 |
No current audio status to return |
| 01 |
00 |
No index/sector signal |
| 02 |
00 |
No seek complete |
| 03 |
00 |
Peripheral device write fault |
| 03 |
01 |
No write current |
| 03 |
02 |
Excessive write errors |
| 04 |
00 |
Logical unit not ready, cause not reportable |
| 04 |
01 |
Logical unit is in progress of becoming ready |
| 04 |
02 |
Logical unit not ready, initiating command required |
| 04 |
03 |
Logical unit not ready, manual intervention required |
| 04 |
04 |
Logical unit not ready, format in progress |
| 05 |
00 |
Logical unit does not respond to selection |
| 06 |
00 |
No reference position found |
| 07 |
00 |
Multiple peripheral devices selected |
| 08 |
00 |
Logical unit communication failure |
| 08 |
01 |
Logical unit communication time out |
| 08 |
02 |
Logical unit communication parity error |
| 09 |
00 |
Track following error |
| 09 |
01 |
Tracking servo failure |
| 09 |
02 |
Focus servo failure |
| 09 |
03 |
Spindle servo failure |
| 0a |
00 |
Error log overflow |
| 0c |
00 |
Write error |
| 0c |
01 |
Write error recovered with auto reallocation |
| 0c |
02 |
Write error - auto reallocation failed |
| 10 |
00 |
ID CRC or ECC error |
| 11 |
00 |
Unrecovered read error |
| 11 |
01 |
Read retries exhausted |
| 11 |
02 |
Error log too long to correct |
| 11 |
03 |
Multiple read errors |
| 11 |
04 |
Unrecovered read error - auto reallocate failed |
| 11 |
05 |
L-EC uncorrectable error |
| 11 |
06 |
CIRC unrecovered error |
| 11 |
07 |
Data resynchronization error |
| 11 |
08 |
Incomplete block read |
| 11 |
09 |
No gap found |
| 11 |
0a |
Miscorrected error |
| 12 |
00 |
Address mark not found for ID field |
| 13 |
00 |
Address mark not found for data field |
| 14 |
00 |
Recorded entity not found |
| 14 |
01 |
Record not found |
| 15 |
00 |
Random positioning error |
| 15 |
01 |
Mechanical positioning error |
| 15 |
02 |
Positioning error detected by read of medium |
| 16 |
00 |
Data synchronization mark error |
| 17 |
00 |
Recovered data with no error correction applied |
| 17 |
01 |
Recovered data with retries |
| 17 |
02 |
Recovered data with positive head offset |
| 17 |
03 |
Recovered data with negative head offset |
| 17 |
04 |
Recovered data with retries and/or CIRC applied |
| 17 |
05 |
Recovered data using previous sector |
| 17 |
06 |
Recovered data without ECC - Data auto-reallocated |
| 18 |
00 |
Recovered data with error correction applied |
| 18 |
01 |
Recovered data with error correction & retries applied |
| 18 |
02 |
Recovered data with ECC and/or retries |
| 18 |
03 |
Recovered data with CIRC |
| 18 |
04 |
Recovered data with LEC |
| 19 |
00 |
Defect list error |
| 19 |
01 |
Defect list not available |
| 19 |
02 |
Defect list error in primary list |
| 19 |
03 |
Defect list error in grown list |
| 1a |
00 |
Parameter list length error |
| 1b |
00 |
Synchronous data transfer error |
| 1c |
00 |
Defect list not found |
| 1c |
01 |
Primary defect list not found |
| 1c |
02 |
Grown defect list not found |
| 1d |
00 |
Miscompare during verify operation |
| 1e |
00 |
Recovered ID with ECC correction |
| 20 |
00 |
Invalid command operation code |
| 21 |
00 |
Logical block address out of range |
| 21 |
01 |
Invalid element address |
| 22 |
00 |
Illegal function for device type |
| 24 |
00 |
Invalid field in CDB |
| 25 |
00 |
Logical unit not supported |
| 26 |
00 |
Invalid field in parameter list |
| 26 |
01 |
Parameter not supported |
| 26 |
02 |
Parameter value invalid |
| 26 |
03 |
Threshold parameters not supported |
| 27 |
00 |
Write protected |
| 28 |
00 |
Not ready to ready transition |
| 28 |
01 |
Import / Export element accessed |
| 29 |
00 |
Power-On, reset, or bus device reset occurred |
| 2a |
00 |
Parameters changed |
| 2a |
01 |
Mode parameters changed |
| 2a |
02 |
Log parameters changed |
| 2b |
00 |
Copy cannot execute since host cannot disconnect |
| 2c |
00 |
Command sequence error |
| 2c |
01 |
Too many windows specified |
| 2c |
02 |
Invalid combination of windows specified |
| 2d |
00 |
Overwrite error on update in place |
| 2f |
00 |
Commands cleared by another initiator |
| 30 |
00 |
Incompatible medium installed |
| 30 |
01 |
Cannot read medium - unknown format |
| 30 |
02 |
Cannot read medium - incompatible format |
| 30 |
03 |
Cleaning cartridge installed |
| 31 |
00 |
Medium format corrupted |
| 31 |
01 |
Format command failure |
| 32 |
00 |
No defect spare location available |
| 32 |
01 |
Defect list update failure |
| 33 |
00 |
Tape length error |
| 36 |
00 |
Ribbon/Ink/Toner faliure |
| 37 |
00 |
Rounded parameter |
| 39 |
00 |
Saving parameters not supported |
| 3a |
00 |
Medium not present |
| 3b |
00 |
Sequential positioning error |
| 3b |
01 |
Tape position error at begining of medium |
| 3b |
02 |
Tape position error at end of medium |
| 3b |
03 |
Tape or electronic vertical forms unit not ready |
| 3b |
04 |
Slew failure |
| 3b |
05 |
Paper jam |
| 3b |
06 |
Failed to sense top of form |
| 3b |
07 |
Failed to sense bottom of form |
| 3b |
08 |
Reposition error |
| 3b |
09 |
Read past end of medium |
| 3b |
0a |
Read past begining of medium |
| 3b |
0b |
Position past end of medium |
| 3b |
0c |
Position past begining of medium |
| 3b |
0d |
Medium destination element full |
| 3b |
0e |
Medium source element empty |
| 3d |
00 |
Invalid bits in identify message |
| 3e |
00 |
Logical unit has not self configured yet |
| 3f |
00 |
Target operating conditions have changed |
| 3f |
01 |
Microcode has been changed |
| 3f |
02 |
Changed operating definition |
| 3f |
03 |
Inquiry data has changed |
| 40 |
nn |
Diagnostic failure on component nn (80h-ffh) |
| 41 |
00 |
Data path failure |
| 42 |
00 |
Power-On or Self-Test failure |
| 43 |
00 |
Message error |
| 44 |
00 |
Internal target failure |
| 45 |
00 |
Select/Reselect failure |
| 46 |
00 |
Unsuccessful soft reset |
| 47 |
00 |
SCSI parity error |
| 48 |
00 |
Initiator detected error message received |
| 49 |
00 |
Invalid message error |
| 4a |
00 |
Command phase error |
| 4b |
00 |
Data phase error |
| 4c |
00 |
Logical unit failed self configuration |
| 4e |
00 |
Overlapped commands attempted |
| 50 |
00 |
Write append error |
| 50 |
01 |
Write append position error |
| 50 |
02 |
Position error related to timing |
| 51 |
00 |
Erase failure |
| 52 |
00 |
Cartridge fault |
| 53 |
00 |
Media load/eject failed |
| 53 |
01 |
Unload tape failure |
| 53 |
02 |
Medium removal prevented |
| 54 |
00 |
SCSI to host system interface failure |
| 55 |
00 |
System resource failure |
| 57 |
00 |
Unable to recover table-of-contents |
| 58 |
00 |
Generation does not exist |
| 59 |
00 |
Updated block read |
| 5a |
00 |
Operator request or state change input |
| 5a |
01 |
Operator medium removal request |
| 5a |
02 |
Operator selected write protect |
| 5a |
03 |
Operator selected write permit |
| 5b |
00 |
Log exception |
| 5b |
01 |
Threshold condition met |
| 5b |
02 |
Log counter at maximum |
| 5b |
03 |
Log list codes exhausted |
| 5c |
00 |
RPL status change |
| 5c |
01 |
Spindles synchronized |
| 5c |
02 |
Spindles not synchronized |
| 60 |
00 |
Lamp failure |
| 61 |
01 |
Unable to acquire video |
| 61 |
02 |
Out of focus |
| 62 |
00 |
Scan head positioning error |
| 63 |
00 |
End of user area encountered on this track |
| 64 |
00 |
Illegal mode for this track |
|
|
|
| 80 |
80 |
Vendor unique ASC and ASCQ |
| through |
|
| ff |
ff |
Vendor unique ASC and ASCQ |
