Sun System Handbook - ISO 3.4 June 2011 Internal/Partner Edition

Asynchronous Line Multiplexor-2

Sun-4/110/150/260/280
Sun-4/310/330/350/360/370/380/390/470/490
SS600MP

501-1203

Power:

7.0 Amps @ +5Vdc

0.2 Amps @ -5Vdc

36.0 Watts

Jumper and Switch Settings

JUMPER	PINS	SETTING	DESCRIPTION
J0201	1-2	In	Test jumper for oscillator
J0202	32 Bit	In	VME address bus size
J0202	24 Bit	Out
J1501	RS-232	In	Enables RS-232 for ALM-2
J1501	RS-449	Out	Not used for ALM-2
J1502	RS-232	In	Enables RS-232 for ALM-2
J1502	RS-449	Out	Not used for ALM-2
J1503	1-2	In	Test jumper for oscillator

DIP SWITCH S0201
DIP SWITCH S0202

ADDRESS BIT A
1
6 A
1
7 A
1
8 A
1
9 A
2
0 A
2
1 A
2
2 A
2
3
A
2
4 A
2
5 A
2
6 A
2
7 A
2
8 A
2
9 A
3
0 A
3
1

SWITCH and SETTING 1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8

mcp0 @ 0x01000000 1 1 1 1 1 1 1 1
0 1 1 1 1 1 1 1

mcp1 @ 0x01010000 0 1 1 1 1 1 1 1
0 1 1 1 1 1 1 1

mcp2 @ 0x01020000 1 0 1 1 1 1 1 1
0 1 1 1 1 1 1 1

mcp3 @ 0x01030000 0 0 1 1 1 1 1 1
0 1 1 1 1 1 1 1

mcp4 @ 0x02000000 1 1 1 1 1 1 1 1
1 0 1 1 1 1 1 1

mcp5 @ 0x02010000 0 1 1 1 1 1 1 1
1 0 1 1 1 1 1 1

mcp6 @ 0x02020000 1 0 1 1 1 1 1 1
1 0 1 1 1 1 1 1

mcp7 @ 0x02030000 0 0 1 1 1 1 1 1
1 0 1 1 1 1 1 1

0 = Off
1 = On

Notes

The Sun-3/110 and Sun 3004 CPU must be 501-1134-06, 501-1163-09, 501-1164-09, or greater. All 501-1208 and 501-1209 revisions are usable.
When four or more ALM-2 boards are installed in a system, the part number must be >=501-1203-05 because of the mechanical fit of the data cables.
An addressing conflict can occur between the ALM-2, MCP, and ALM-1. Refer to the VME Installation Notes in the Slot Assignments chapter.

Reference

Asynchronous Line Multiplexor-2 Configuration Procedures, 813-2042.

Last updated: December 2, 1996


Copyright � 2011 Sun Microsystems, Inc. All rights reserved. Feedback