|
|
| LTO2 |
LTO2 Low Voltage Differential (LVD) 200 GB SCSI Tape Drive |
| LTO3 |
LTO3 LVD 400 GB SCSI Tape Drive |
| SDLT 600 |
SDLT 600 LVD 300 GB SCSI Tape
Drive |
The C4 Library:
- Supports up to two of the above listed tape drive models
- Supports mixed media provided SLDT600 and LTO2/LTO3 media magazines are installed
within the library
- Has two (2) HD68-pin SCSI connectors on the tape drive for interfaces
- Has two (2) VHDCI68-pin SCSI connectors on the robotics card for interfaces
|
|
|
| AC Voltage Range |
90 to 264 VAC |
| Frequency |
47 to 63 Hz |
| Power Consumption |
Typical: 200W
Maximum: 250W |
| Heat Output |
3070 BTU/Hr Fully Populated |
| Heat Dissipation |
300W |
| Power Cable |
US NEMA 5-15P |
| Temperature & Humidity |
Operating:
10° C to 35° C (50° F to 95° F), 20% to
80% noncondensing
Nonoperating:
-40° C to 65° C (-40° F to 149° F), 10% to
90% noncondensing |
| Altitude |
Operating:
-153 to 3048 M (-500 to 10000 ft)
Nonoperating:
-153 to 12192 M (-500 to 40000 ft) |
| Noise (in accordance with ISO 9296) |
Operating: 7.5 Bels
Idle: 7.0 Bels |
| Shock |
4.0 g, 11 msec, half-sine, applied in all six directions |
| Vibration |
0.21gRMS (random)
0.25 g (5-500 Hz, 5 sweeps), operating axis (bottom) |
|
|
| Height |
171 mm (6.75 in)
|
| Width |
482 mm (19 in) |
| Depth |
787 mm (31 in) |
| Weight (without drives) |
39 kg (87 lb) |
|
|
| Safety |
UL-1950, CSA 950, EN60950 |
| RFI/EMI |
FCC CFR 47-15J (Level A), EN55022 (CISPR 22) Level A, EN 55024 (CISPR 24), VCCI |
| Agency Markings |
CE, VCCI, UL, FCC, CSA |
|
|
This section provides capacity and performance specifications for one (1)
Sun StorEdge C4 Library module.
The C4 Library supports a rack-mounted configuration and has the following characteristics:
- Up to nine (9) C4 Libraries can be installed in the Sun Rack 900-38.
- Up to nine (9) C4 Libraries can be installed in the Sun Rack 1000-38.
- Up to ten (10) C4 Libraries can be installed in the Sun Rack 1000-42.
- The library has a built-in pass-through port that allows other C4 Libraries to be stacked in a rack and
the tape cartridges can be passed between the libraries.
- No additional hardware is needed to utilize the scalability feature of the pass-through port.
|
| Item |
LTO2 |
LTO3 |
SDLT600 |
| Number of Tape Drives |
2 |
2 |
2 |
| Number of Cartridges |
38 |
38 |
32 |
| Cartridge Capacity (native)1 |
200 GB |
400 GB |
300 GB |
| Cartridge Capacity (compressed)2 |
400 GB |
800 GB |
600 GB |
| Maximum Library Capacity (native)1 |
7.6 TB |
15.2 TB |
9.6 TB |
| Maximum Library Capacity (compressed)2 |
15.2 TB |
30.4 TB |
19.2 TB |
| Drive Sustained Transfer Rate (1 drive) |
30 MB/sec |
80 MB/sec |
36 MB/sec |
| Maximum Transfer Rate (library with 2 drives, native)1 |
216.0 GB/hr |
576.0 GB/hr |
259.2 GB/hr |
| Maximum Transfer Rate (library with 2 drives, compressed)2 |
432.0 GB/hr |
1152.0 GB/hr |
518.4 GB/hr |
1Native represents the capacity without compression.
2Compressed identifies a capacity compression ratio of 2:1.
|
|
|
| Allow adequate space behind
the library for proper ventilation. |
The Sun StorEdge C4 tape library fits into and is supported
in the following racks:
- Sun Rack 900-38
- Sun Rack 1000-38
- Sun Rack 1000-42
|
