Disks
|
36GB |
- Seagate ST336752FC, 36GB - 15000 RPM, FC-AL
- Seagate ST336753FC, 36GB - 15000 RPM, FC-AL
- Fujitsu MAS3367FC, 36GB - 15000 RPM, FC-AL
- Fujitsu MAU3367FC, 36GB - 15000 RPM, FC-AL
|
73GB |
- Seagate ST373207FC, 73GB - 10000 RPM, FC-AL
- Seagate ST373307FC, 73GB - 10000 RPM, FC-AL
- Seagate ST373453FC, 73GB - 15000 RPM, FC-AL
- Fujitsu MAT3073FC, 73GB - 10000 RPM, FC-AL
- Fujitsu MAP3735FC, 73GB - 10000 RPM, FC-AL
- Fujitsu MAS3735FC, 73GB - 15000 RPM, FC-AL
- Fujitsu MAU3073FC, 73GB - 15000 RPM, FC-AL
- Hitachi DK32EJ-72FC, 73GB - 10000 RPM, FC-AL
- Hitachi HUS1073FA, 73GB - 10000 RPM, FC-AL
|
146GB |
- Seagate ST3146707FC, 146GB - 10000 RPM, FC-AL
- Seagate ST3146807FC, 146GB - 10000 RPM, FC-AL
- Fujitsu MAP3147FC, 146GB - 10000 RPM, FC-AL
- Fujitsu MAT3147FC, 146GB - 10000 RPM, FC-AL
- Fujitsu MAW3147FC, 146GB - 10000 RPM, FC-AL
- Hitachi DK32EJ-14FC, 146GB - 10000 RPM, FC-AL
- Hitachi HUS1014FA, 146GB - 10000 RPM, FC-AL
|
300GB |
- Seagate ST3300007FC (300GB - 10000 RPM FC-AL)
- Seagate ST3300007FC (300GB - 10000 RPM FC-AL), RoHS
- Fujitsu MAT3300FC (300GB - 10000 RPM FC-AL)
- Fujitsu MAW3300FC (300GB - 10000 RPM FC-AL), RoHS
|
Capacity |
2 x 2 Configuration |
2 Controllers and 2 Array trays (28 disks) using 300GB disks - 8.4TB |
2 x 4 Configuration |
2 Controllers and 4 Array trays (56 disks) using 300GB disks - 16.8TB |
2 x 6 Configuration |
2 Controllers and 6 Array trays (84 disks) using 300GB disks - 25.2TB |
Note 1: This is raw capacity; if a disk is used for a "hot spare", you must subtract this capacity
from the total raw capacity.
Note 2: An expansion cabinet can be added to the configuration to increase total storage capacity. |
Environment
|
AC input |
200 to 240 VAC at 50 to 60 Hz single phase |
Input power |
Base Unit: 4200 W maximum, two dedicated 200
to 220 VAC, 30A circuit breakers
Base Unit + Expansion Cabinet: 8,400 W maximum, four dedicated 200
to 220 VAC, 30A circuit breakers
Base Unit + 2 Expansion Cabinets: 12,600 W maximum, six dedicated 200
to 220 VAC, 30A circuit breakers |
Heat output |
Base Unit: ~15,000 BTU/hr
Base Unit + Expansion Cabinet: ~28,000 BTU/hr
Base Unit + 2 Expansion Cabinets: ~28,000 BTU/hr |
Temperature |
Operating: 5° C to 35° C (41° F to
95° F)
Nonoperating: -40° C to 60° C (-40° F to -76° F) |
Humidity |
Operating: 10% to 90%, noncondensing, maximum
gradient 10% per hour
Nonoperating: 93%, noncondensing, maximum gradient 10% per hour |
Altitude |
Operating: 3000 m (9840 ft )
Nonoperating: 12000 m (39,370 ft) |
Vibration |
Operating: 0.15 g on Z axis; 0.10 g on X and
Y axes; 5 to 500 Hz sinusoidal
Nonoperating: 0.5 g on Z axis; 0.25 g on X and Y axes; 5 to 500 Hz
sinusoidal |
Shock |
Operating: 3.0 g for maximum duration of 11 ms
(half sinewave)(from any axis X, Y, Z)
Nonoperating: 1.0 inch roll-off freefal, front to back rolling directions
(from any axis X, Y, Z) |
Power Connector (US) |
NEMA L6-30P for 200 to 240 VAC |
Power Connector (International) |
32A, single phase IEC 309, connected for 220 to 240 VAC |
Regulations
Meets or exceeds the following requirements:
|
Immunity |
EN55024 |
Safety and Emissions |
IEC60950, EN60950, UL60950, FCC Part 15 (47CFR15B), EN55022, EN 61000-3-2, EN 61000-3-3 |
Dimensions and Weights
|
Height |
Base Unit: 190.5 cm (75 in)
Base Unit + Expansion Cabinet: 190.5 cm (75 in)
Base Unit + 2 Expansion Cabinets: 190.5 cm (75 in) |
Width |
Base Unit: 60.7 cm (23.9 in)
Base Unit + Expansion Cabinet: 121.4 cm (47.8 in)
Base Unit + 2 Expansion Cabinets: 182.1 cm (71.7 in) |
Depth |
Base Unit: 94 cm (37 in)
Base Unit + Expansion Cabinet: 94 cm (37 in)
Base Unit + 2 Expansion Cabinets: 94 cm (37 in) |
Weight |
Base Unit: 659 kg (1450 lbs)
Base Unit + Expansion Cabinet: 1364 kg (3000 lbs)
Base Unit + 2 Expansion Cabinets: 2068 kg (4550 lbs) |
Footprint |
Base Unit: 0.57 sq. m (6.1 sq. ft)
Base Unit + Expansion Cabinet: 1.4 sq. m (12.3 sq. ft)
Base Unit + 2 Expansion Cabinets: 1.7 sq. m (18.4 sq. ft) |
Clearance and Service Access
|
Front |
122 cm (48 in) |
Rear |
92 cm (36 in) |