Sun Fire X4150
375-3497 |
540-7323 |
System Board
|
Assembly/FRU System Board + Tray
|
Connectors and Jumpers
LOCATION |
PINS |
SETTING |
DESCRIPTION |
J46 |
10 |
n/a |
Unknown connector |
J51 |
8 |
n/a |
Unknown connector |
JP9 |
14 |
n/a |
Unknown connector |
J19 |
2 |
Out |
Unknown |
J20 |
2 |
Out |
Unknown |
J23 |
6 |
Out |
Unknown |
J25 |
2 |
Out |
Unknown |
J37 |
2 |
Out |
Unknown |
J48 |
2 |
Out |
Unknown |
JP10 |
3 |
Out |
Unknown |
Sun Fire X4150 Codename: Doradi |
Notes
- The minimum Solaris operating system is Solaris 10 8/07.
- System Board details are not available in a Bill of Materials.
- The System Board FRU includes a mounting tray, three PCI Express Risers,
two 250-1802 Cleaning Wipes, and two 310-0065 Thermal Grease Syringes.
- Thermal Grease FRU 350-1271 includes one 310-0065 Thermal Grease Syringe
and one 250-1802 Cleaning Wipe.
(WO_39580)
Disk Drive Backplane Cabling Notes
- Install up to eight SAS Disk drives.
- Use cable kit 540-7364 to connect to an optional SAS Host Bus Adapter.
Cover Interlock Switch Notes
- Resistor R1856 was removed in November 2007.
(WO_38182)
- Systems with R1856 installed can power on with the top cover removed.
Firmware Notes
- MirrorBit Flash code at U97 and U99 do not have Sun part numbers.
- MAXII CPLD code at U61 does not have a Sun part number.
- BIOS code at U136 does not have a Sun part number.
Memory Notes
- Install memory in matched pairs.
- Memory FRUs include two matched DIMMs.
- Sun Fire X4150 DIMMs are not labeled with the FRU part number.
- Install the largest capacity memory in the lowest numbered slots.
- Install the first DIMM pair in slots A0/B0.
Install the second pair in slots C0/D0.
- Install additional memory in slots A1/B1, C1/D1, A2/B2, C2/D2, A3/B3,
and C3/D3.
References
-
Sun Fire X4150 Server Installation Guide, 820-1851.
-
Sun Fire X4150 Server Service Manual, 820-1852.
-
Sun Fire X4150 Server Product Notes, 820-1854.
|