Sun Fire X2250
375-3587 |
P/N DA0S86MBAC0 MAC 001E68xxxxxx
|
Sun Fire X2250 Codename: Venus |
Notes
- The minimum Solaris operating system is Solaris 10 8/07 x64.
- The systems CPU speeds and CPU part numbers are labeled on the blower air duct.
System Board Notes
- System board removal requires a #2 Phillips Screwdriver and an 3/16" nutdriver.
- The System Board FRU includes two 250-1802 Cleaning Wipes and two 310-0065
Shin-Etsu X23-7783D Thermal Grease Syringes.
- Heatsink 310-0206 is pre-greased with Shin-Etsu X23-7783D.
- Two of the seven USB ports which interface to the AST2000 and are not user accessable.
Memory Notes
- Install memory in matched pairs.
- Install the largest capacity memory in the lowest numbered slots.
- Install the pairs in slots A0/B0, C0/D0, A1/B1, and then C1/D1.
- Memory FRUs include two matched DIMMs.
- DIMMs are not labeled with the FRU or manufacturing part number.
Memory and Processor Notes
- Use DDR2-667 FBDIMMs with 1333MHz Front Side Bus processors only.
- The Xeon E5405, L5420, and X5460 FSB operates at 1333MHz.
- Use DDR2-800 FBDIMMs with 1600MHz Front Side Bus processors only.
- The Xeon E5462, E5472, and X5272 FSB operates at 1600MHz.
- Mixing DDR2-667 and DDR2-800 FBDIMMs on the system board is not supported.
References
-
Sun Fire X2250 Installation Guide, 820-4591.
-
Sun Fire X2250 Service Manual, 820-4593.
-
Sun Fire X2250 Product Notes, 820-4594.
-
Integrated Lights Out Manager Supplement for Sun Fire X2250 Server, 820-4596.
|