Sun Fire V215 / V245
375-3462 |
375-3463 |
375-3464 |
0MB w/out Heatsink L |
0MB USIIIi FRU 2× 1.503GHz w/ Heatsink L |
0MB USIIIi FRU 1× 1.503GHz w/ Heatsink L |
LOCATION |
PINS |
SETTING |
DESCRIPTION |
J7 |
10 |
NA |
Unused Connector |
J11 |
2 |
Out |
Unknown |
J13 |
4 |
NA |
Unused Connector |
J14 |
3 |
2-3 In |
SER2/TTYB |
J15 |
3 |
2-3 In |
SER2/TTYB |
J17 |
3 |
1-2 In |
Enable TTYB when Host Power On |
J20/J21 |
5 |
Out |
Unknown |
J19 |
2 |
Out |
Unknown |
J26 |
6 |
Out |
Unknown |
J31 |
2 |
Out |
Unknown |
J37 |
6 |
Out |
Unknown |
J38 |
3 |
1-2 In |
1.40V CPU0 Vcore Output |
J43 |
8 |
3-4 |
1.5GHz UltraSPARC IIIi |
J45 |
4 |
NA |
Unused Connector |
J46 |
2 |
Out |
Unknown |
J48 |
3 |
1-2 In |
1.40V CPU1 Vcore Output |
J49 |
3 |
Out |
Unknown |
J51 |
2 |
Out |
Unknown |
J52 |
10 |
NA |
Unused Connector |
SW1 |
NA |
NA |
POR Button |
SW2 |
NA |
NA |
XIR Button |
SW3 |
NA |
NA |
PWR Button |
SW4 |
NA |
NA |
Unknown Button |
Sun Fire V215 Codename: Seattle 1U
Sun Fire V245 Codename: Seattle 2U |
Notes
- The minimum operating system is Solaris 9 9/05 or 10 6/06.
- ALOM update is available at
Firware Downloads.
Memory Notes
- Bank, Rank, DIMM, and XOR Interleaving is supported.
- The minimum requirement is two DIMMs in any Bank (B0/D0/D1 or B1/D0/D1).
- UltraSPARC IIIi supports single bank and dual bank DDR-1 SDRAM DIMMs.
- Two DIMMs of the same bank size (single or dual) and memory size form a
bank.
- Memory error reporting identifies a failing Bank, not a single failing DIMM.
References
-
Sun Fire V215 and V245 Servers Administration Guide, 819-3036.
-
Sun Fire V215 and V245 Servers Installation Guide, 819-3037.
-
Sun Fire V215 and V245 Servers Service Manual, 819-3038.
-
Sun Fire V215 and V245 Servers Product Notes, 819-3040.
|