Sun Fire V125
375-3478 |
0MB USIIIi FRU 1× 1.002GHz
w Fan/Heatsink L |
LOCATION |
PINS |
SETTING |
DESCRIPTION |
JP1 |
1-2 3-4 9-10 |
In In In |
1.4V Core VID[4:0] Bit 4 (00110)
1.4V Core VID[4:0] Bit 3 (00110)
1.4V Core VID[4:0] Bit 0 (00110) |
JP2 |
1-2 1-2 |
Out In |
ALOM Flash Normal (default)
ALOM Flash Recovery |
JP3 |
1-2 1-2 |
Out In |
ALOM Normal (default)
ALOM Reset |
JP4 |
1-2 |
In |
1.002GHz CONFIG[2:0] Bit 0 (110) |
JP5 |
1-2 1-2 |
Out In |
ATAPI Master - CSEL Open (default)
ATAPI Slave - CSEL Grounded |
JP6 |
1-2 2-3 |
In/Out In |
OBP Flash Select (default)
ROMBO Select |
JP8 |
1-2 2-3 |
In In |
Normal CMOS (default)
Clear CMOS |
JP10 |
1-2 1-2 |
Out In |
PS_ON# (default)
PS_ON# Override |
JP11 |
1-2 1-2 |
Out In |
OBP Flash Write Enabled (default)
OBP Flash Write Protected |
JP12 |
1-2 1-2 |
Out In |
ALOM Console Normal (default)
ALOM Console Bypass |
JP13 |
1-2 2-3 |
In/Out In |
OBP Flash Normal (default)
OBP Flash Recovery |
Sun Fire V125 Codename: El Paso |
Notes
- The minimum operating system is Solaris 8 2/04, Solaris 9 9/04, or
Solaris 10 3/05.
- ALOM update is available at
Firmware Downloads.
- The JBUS clock is 167MHz and the Memory clock is 125MHz with
1.002GHz CPUs.
Memory Notes
- Bank, Rank, DIMM, and XOR Interleaving is supported.
- UltraSPARC IIIi supports single bank and dual bank DDR-1 SDRAM DIMMs.
- Two DIMMs of the same bank size (single or dual) and memory size form a
bank.
- The minimum requirement is two DIMMs in any Bank (B0/D0/D1 or B1/D0/D1).
- Only CPU 0 DIMMs are accessible in a single CPU system (CPU 0).
- Memory is mapped globally and is accessible by either CPU in a dual-CPU
system.
- Memory error reporting identifies a failing Bank, not a single failing DIMM.
References
-
Sun Fire V125 Server Administration Guide, 819-7420.
-
Sun Fire V125 Server Service Manual, 819-7421.
-
Sun Fire V125 Server Installation Guide, 819-7422.
-
Sun Fire V125 Server Product Notes, 819-7424.
-
Heatsink Field Replaceable Unit Installation Guide, 817-4048.
|