Sun Blade X8440 Server Module
A98-AA |
X5199A-Z |
X5200A-Z |
0MB Memory w/o Processor w/o Disk Drive |
8GB Memory 2 × 3.0GHz Opteron 8222 |
16GB Memory 4 × 3.0GHz Opteron 8222 |
501-7611 |
541-1950 |
F541-1950 |
0MB Board w/o Sheetmetal L |
0MB Assembly w/o Processors w/o Heatsinks L |
0MB FRU w/o Processors with Heatsinks
|
Headers and Jumpers
LOCATION |
PINS |
SETTING |
DESCRIPTION |
J1_9 |
1-16 |
Out |
Unknown (default) |
J0401_9 |
7-8 |
In |
Unknown (default) |
J1101 |
1-10 |
Out |
Unknown (default) |
J1401_9 |
1-10 |
Out |
Unknown (default) |
J1901 |
15-16 |
In |
Unknown (default) |
J1901 |
17-18 |
In |
Unknown (default) |
J1901 |
19-20 |
Out |
Unknown (default) |
J1902 |
1-10 |
Out |
Unknown (default) |
J4805 |
1-20 |
Out |
Unknown (default) |
J4806 |
1-6 |
Out |
Unknown (default) |
J5201 |
1-16 |
Out |
Unknown (default) |
Sun Blade X8440 Server Module Codename: A4F+ and Mira |
Notes
- The minimum Solaris operating system is Solaris 10 6/06 x64.
- Two processor configurations require two Baffle 541-2755.
- Two processor configurations require one HT Terminator 371-2481.
- Option 5189A-Z includes one 371-2481 and two 541-2755.
Module Notes
- Use a 9/64-inch Allen wrench to remove the heatsink shoulder screws.
- The Module FRU includes four pre-greased heatsinks.
- The Module FRU includes four alcohol wipes and four thermal grease syringes.
- The Module FRU does not include heatsink mounting hardware.
- Use shoulder screw 240-4717, spring 240-4762, and washer 240-4841.
- Each syringe includes 0.5 Grams (@ 0.3ml) of ShinEtsu G751 thermal grease.
- Each Opteron processor requires approximately 0.1ml of thermal grease.
- Use a pre-greased heatsink or a thremal grease syringe, but not both.
References
-
Sun Blade 8000 Modular System Installation Guide, 819-5647.
-
Sun Blade 8000 Modular System Product Notes, 819-5651.
|